#
# NetWorker
# 7.2.2.Build.422
# LEGATO Software, a division of EMC.
#
# PLASMON ASC/ASCQ Error Codes
#
0x80, 0x11, slave cpu comm failure
0x80, 0x12, park failure
0x80, 0x15, pivot cable failure
0x80, 0x16, drive interface board disconnected
0x80, 0x17, lift cable failure
0x80, 0x18, main harness lower cable failure
0x80, 0x19, main harness upper cable failure
0x80, 0x1a, drive not installed
0x80, 0x1d, element unexpectly empty
0x80, 0x1e, element unexpectly full
0x80, 0x20, pick tape failure
0x80, 0x21, store tape failure
0x80, 0x22, drive cable disconnected
0x80, 0x23, drive not ready
0x80, 0x24, drive load failure
0x80, 0x25, drive unload failure
0x80, 0x26, eject failure
0x80, 0x29, scsi term power low
0x80, 0x2b, cannot eject cartridge
0x80, 0x2c, mail slot open
0x80, 0x31, lift home failure
0x80, 0x32, lift position failure
0x80, 0x33, cartridge projecting from slot drv
0x80, 0x34, pivot not aligned
0x80, 0x35, reserved
0x80, 0x36, reserved
0x80, 0x37, reserved
0x80, 0x38, reserved
0x80, 0x3a, picker home failure
0x80, 0x3b, picker position failure
0x80, 0x3c, swap picker failure
0x80, 0x3d, picker load failure
0x80, 0x3e, picker jammed
0x80, 0x3f, picker misposition
0x80, 0x40, pivot align failure
0x80, 0x43, cannot open mail slot
0x80, 0x45, element scan fail
0x80, 0x46, SRAM reset
0x80, 0x4a, from door is open
0x80, 0x51, mail slot motor home failure
0x80, 0x52, cannot close mail slot
0x80, 0x54, bad drive cable
0x80, 0x55, drive address conflict
0x80, 0x55, overheat condition inside cabinet
0x80, 0x57, mail slot sensor fail
0x80, 0x58, mail slot jammed
0x80, 0x59, power supply failure
0x80, 0x60, drive power disconnected
0x86, 0x00, transport element full
