#
# NetWorker
# 7.2.2.Build.422
# LEGATO Software, a division of EMC.
#
# BNCHMARK ASC/ASCQ Error Codes
#
0x0a, 0x80, Error log generated
0x0c, 0x80, Write SCSI FIFO CRC error
0x11, 0x80, Read SCSI FIFO CRC error
0x11, 0x81, Block port detected EDC error
0x11, 0x82, Block port detected record CRC error
0x20, 0x81, Illegal command while in recovery mode
0x24, 0x81, Invalid mode on WRITE buffer
0x24, 0x82, Media in drive
0x24, 0x84, Insufficient resources
0x24, 0x86, Invalid offset
0x24, 0x87, Invalid size
0x24, 0x89, Image data over limit
0x24, 0x8b, Image/personality is bad
0x24, 0x8c, Not immediate command
0x24, 0x8d, Bad driver/server image EDC
0x24, 0x8e, Invalid Personality for Code Update (CUP)
0x24, 0x8f, Bad Controller Image EDC
0x27, 0x80, Hardware write protect
0x27, 0x82, Data safety write protect (Use a cleaning tape if Use Cleaning Tape LED is lit)
0x3a, 0x80, Media not present - VU cartridge missing
0x40, 0x80, Diagnostic/POST failure - ROM EDC error
0x40, 0x81, Diagnostic/POST failure - RAM failure
0x40, 0x82, Diagnostic/POST failure - bad drive status
0x40, 0x83, Diagnostic/POST failure - loader diagnostics failure
0x40, 0x84, Diagnostic/POST failure - POST soft failure
0x44, 0x80, Unexpected selection interrupt
0x44, 0x82, Command complete sequence failure
0x44, 0x83, SCSI Chip, Gross Error/ Illegal  Command Status
0x44, 0x84, Unexpected/Unexplained residue count in transfer register
0x44, 0x85, Immediate data transfer timeout
0x44, 0x86, Insufficient CDB bytes
0x44, 0x87, Disconnect/SDP sequence failed
0x44, 0x88, Bus DMA transfer timeout
0x44, 0x89, Command cleared from queue without other
0x44, 0x8a, Over temperature condition
0x44, 0xc1, EEROM copy 1 area bad
0x44, 0xc2, EEROM copy 2 area bad
0x44, 0xc3, Both EEROM copy areas bad
0x5d, 0xff, False Exception Condition
0x80, 0x00, Calibration error (use cleaning tape)
0x80, 0x01, Cleaning required (use cleaning tape)
0x80, 0x02, Cleaning requested
0x80, 0x03, Soft error exceeds threshold
0x81, 0x00, Directory read error (use cleaning tape)
0x82, 0x00, Not allowed if not at BOT
0x83, 0x00, A RD/WR data transfer was aborted due to a bus parity error or unexpected ATTN
