| 
Test
 | 
Description
 | 
      | 
a3500fctest.1m | 
Verifies functionality of Sun StorEdge A3500FC disk tray. 
 | 
      | 
a5ksestest.1m | 
Tests Sun StorEdge A5000 and A5200 arrays. 
 | 
      | 
a5ktest.1m | 
Tests the functionality of disks in the Sun StorEdge A5000 and A5200 array. 
 | 
      | 
brocadetest.1m | 
Diagnose Brocade Silkworm Fibre Channel switches. 
 | 
      | 
checkcron.1m | 
Check crontabentries. | 
      | 
clearcache.1m | 
Clears Storage Automated Diagnostic Environment cache files. 
 | 
      | 
config_solution.1m | 
Creates a configuration snapshot during the manufacturing and upgrading of Sun StorEdge 6920 system solutions. 
 | 
      | 
d2disktest.1m | 
Tests the functionality of the Internal Sun StorEdge D2 Array disk. 
 | 
      | 
daksestest.1m | 
Tests Sun Fire V880 FC-AL disk backplanes. 
 | 
      | 
daktest.1m | 
Tests the Sun Fire V880 FC-AL disk. 
 | 
      | 
dex.1m | 
Device Exerciser for Sun StorEdge arrays. 
 | 
      | 
discman.1m | 
Discovery manager. Used to set the timeout for discovery manager.
 | 
      | 
disk_inquiry.1m | 
Disk-only version of the inquiry program. 
 | 
      | 
disktest.1m | 
Tests the functionality of fibre channel disks. 
 | 
      | 
fcdisktest.1m | 
Tests the functionality of internal fibre channel disks. 
 | 
      | 
fctapetest.1m | 
Tests the functionality of Fibre Channel tape drives. 
 | 
      | 
ifptest.1m | 
Tests functionality of the PCI FC-100 Fibre Channel-Arbitrated loops (FC-AL) card. 
 | 
      | 
linktest.1m | 
Diagnose Sun StorEdge network passive Fibre Channel components. 
 | 
      | 
qlctest.1m | 
Tests the functions of the Sun StorEdge 1 Gbyte and 2 Gbyte PCI and cPCI Fibre Channel Network Adapter boards. 
 | 
      | 
ras_admin.1m | 
Command line interface to Storage Automated Diagnostic Environment. 
 | 
      | 
ras_discover.1m | 
Discovers devices and updates the configuration file on the slave and the master. 
 | 
      | 
ras_install.1m | 
Executes the ras_installcommand to start the Storage Automated Diagnostic Environment services. | 
      | 
ras_patchlist.1m | 
Executes PatchPro software and creates a list of devices and required patches. 
 | 
      | 
ras_remote.1m | 
Executes Storage Automated Diagnostic Environment commands remotely. 
 | 
      | 
ras_revcheck.1m | 
Checks the software, hardware, and firmware revision levels. 
 | 
      | 
ras_upgrade.1m | 
Upgrades a set of devices using PatchPro. 
 | 
      | 
rasagent.1m | 
Monitors, collects, and reports information about Sun storage products. 
 | 
      | 
sanbox.1m | 
Access the SANbox switch diagnostic facilities. 
 | 
      | 
save_password.1m | 
Change the Storage Automated Diagnostic Environment admin password. 
 | 
      | 
se_configcheck.1m | 
Verify the configuration of a Sun StorEdge Solution System (3900/6900).
 | 
      | 
se2_configcheck.1m | 
Verify the configuration of a Sun StorEdge Solution System (6320/6920).
 | 
      | 
socaltest.1m | 
Tests the SOC+ host adapter card. 
 | 
      | 
stresstest.1m | 
Checks for possible SAN errors. 
 | 
      | 
switch2test.1m | 
Diagnose Sun StorEdge Network FC switch-8 and switch-16 2 Gbyte Fibre Channel switches. 
 | 
      | 
switchtest.1m | 
Diagnose Sun StorEdge Network Fibre Channel switch-8 and switch-16 switches. 
 | 
      | 
t3ofdg | 
Tests the functionality of the Sun StorEdge T3 array. 
 | 
      | 
t3test | 
Tests the functionality of the Sun StorEdge T3 and T3+ array LUNs. 
 | 
      | 
t3volverify | 
Runs manual parity checks on Sun StorEdge T3 array volumes. 
 | 
      | 
testt3 | 
Runs manual parity checks on Sun StorEdge T3 array volumes. 
 | 
      | 
vediag | 
Runs virtualization engine diagnostics through SLICD. 
 | 
      | 
veluntest | 
Tests the functionality of the virtualization engine by accessing the VLUNs. 
 | 
      | 
volverify | 
Runs manual parity checks on Sun StorEdge T3, T3+, and 6120 array volumes. 
 |