<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">Patch-ID# 119552-03

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: brocade 2g 4g fibre channel director switch firmware fos 12000
Synopsis: Brocade 2g 4g fibre channel director switch firmware FOS 12000
Date: May/12/2006


Install Requirements: NA                      
                      
Solaris Release: 8 9 10 10_x86

SunOS Release: 5.8 5.9 5.10 5.10_x86

Unbundled Product: Brocade 2GB Fibre Channel

Unbundled Release: N/A
NOTE: FOS 5.0.4a

Xref: 

Topic: Brocade FOS 5.0.4a firmware for SilkWorm 12000

Relevant Architectures: sparc i386

BugId's fixed with this patch: 6354962

Changes incorporated in this version: 6354962

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

	504a_mibs.zip
	README.119552-03
	patchinfo
	v5.0.4a.zip
	v5.0.4a_RN.pdf
119552-03.tar

Problem Description:

6354962 Fabric/Host ports from the 6140 array fails to login to the switch as 
CSM2 type
 
NOTE: Special Instructions
--------------------
This FOS release is only for 12000 support. Please use v5.1.0a for other switch
 models.
 
 
IMPORTANT 	IMPORTANT 	IMPORTANT
**************************************************
   The items made available through this website
   are subject to United States export laws and
   may be subject to export and import laws
   of other countries. You agree to strictly comply
   with all such laws and obtain licenses to
   export, re-export, or import as may be required.
   Unless expressly authorized by the United States
   Government to do so you will not, directly or
   indirectly, export or re-export the items made
   available through this website, nor direct the
   items therefrom, to any  embargoed or restricted
   country identified in the United States export
   laws, including but not limited to the Export
   Administration Regulations (15 C.F.R. Parts
   730-774).
**************************************************

Patch Installation Instructions:
--------------------------------
 
This is not an OS patch and is not installed with the standard Solaris 
patchadd(1M) command.  After unpacking the patch, follow the "Special Install 
Instructions" below to upgrade the FC switch firmware.
 
This patch contains firmware which is installed on the Brocade SilkWorm 
200E/3250/3850/3900/4100 and 12000/24000/48000 FC switch model.  To install 
using other platforms, minimum FTP services is required. Please see Brocade 
document  53-0000518-09.
 
Prerequisites for installing the new firmware include:
 
 * FTP server (solaris host).
 
 * An Ethernet connection from a Solaris host to the Brocade Switch. To use an 
 Ethernet connection, the Brocade FC switch must have an IP address assigned and
  the user must know the admin password assigned to the switch.
 
Unpack the patch into any convenient directory such as /var/tmp, and refer to 
the Special Install Instructions below.

Special Install Instructions:
----------------------------- 
Sun supports firmware upgrades within two feature releases (a feature 
release is a major release indicated by the
second digit "Y" of the release number, for example, X.Y.Z); while 
upgrades of two releases is supported, single
release upgrades are recommended. Following are the major upgrade 
versions for the Fabric OS:
- v4.0x
- v4.1x
- v4.2x
- v4.4x
- v5.0x 
 
This firmware upgrade procedure will not cause I/O interruption if using FW 
v4.1.0 or greater.
 
 
 1. Change your working directory to the directory in which the patch
    was saved. Then unzip the firmware file, v5.0.3.zip.
    Confirm that the v5.0.3 directory is present using the "ls" command. 
    Do not link release.plist in this directory.
 
 2. Invoke telnet using the following syntax:
 
	telnet &lt;hostname&gt;
 
	where &lt;hostname&gt; is the name or IP address of the FC switch. If security
	is enabled, you will need sectelnet application or ssh.   
 
 
 3. Verify that the current switch firmware by typing the
    following command at the "admin&gt;" prompt:
 
	version
 
EXAMPLE:
	sw0:admin&gt; version
	Kernel:     2.4.19
	Fabric OS:  v5.0.3    &lt;---
 
 
 4. For 12000, at the "admin&gt;" prompt, type hashow 
 
EXAMPLE:
	sw0:admin&gt; hashow 
	Local CP (Slot 5, CP0): Active
	Remote CP (Slot 6, CP1): Standby, Healthy
	HA enabled, Heartbeat Up, HA State synchronized
 
 5. At the "admin&gt;" prompt, type the command:
 
        firmwaredownload
 
    Enter FTP server where firmware exists, login, file, and password.
 
 6. As a best practice, it is advised to upgrade edge switches serially, one at
  a time.
 
EXAMPLE:
	switch:admin&gt;  firmwaredownload
	This command will upgrade both CPs in the switch. If you want to upgrade
	 a single CP only, please use -s option. You can run 
	 firmwareDownloadStatus to get the status of this command.
 
	This command will cause the active CP to reset and will
	require that existing telnet, secure telnet or SSH sessions
	be restarted. Do you want to continue [Y]: y
	Server Name or IP Address: &lt;hostname&gt; 
	User Name: root
	File Name: /var/tmp/v5.0.4a/release.plist
	Password: 
	Firmwaredownload has started on Standby CP. It may take up to 10 minutes. Firmwaredownload has completed successfully on Standby CP. Standby CP reboots. Standby CP booted up.
	Standby CP booted up with new firmware.
 
Firmwaredownload process is automatically invoked on the standby cp and the 
process will take approximately 25 minutes on 12000/24000/48000 model and 15 
minutes on the 200E/3250/3850/3900/4100 model.
	Verify with the command "firmwaredownloadstatus"
 
 
12000 EXAMPLE:
[0]: Wed Apr 19 17:36:39 2006
cp1: Firmwaredownload has started on Standby CP. This step may take up to 30 
minutes.
 
[1]: Wed Apr 19 17:43:05 2006
cp1: Firmwaredownload has completed successfully on Standby CP.
 
[2]: Wed Apr 19 17:43:07 2006
cp1: Standby CP is going for reboot.
 
[3]: Wed Apr 19 17:46:07 2006
cp1: Standby CP booted up.
 
[4]: Wed Apr 19 17:49:12 2006
cp0: Forced failover succeeded. New Active CP is running new firmware
 
[5]: Wed Apr 19 17:49:18 2006
cp0: Firmwaredownload has started on Standby CP. This step may take up to 30 
minutes.
 
[6]: Wed Apr 19 17:58:51 2006
cp0: Firmwaredownload has completed successfully on Standby CP.
 
[7]: Wed Apr 19 17:58:55 2006
cp0: Standby CP reboots.
 
[8]: Wed Apr 19 18:02:54 2006
cp0: Standby CP booted successfully with new firmware.
 
[9]: Wed Apr 19 18:02:57 2006
cp0: Firmwarecommit has started on both Active and Standby CPs.
 
[10]: Wed Apr 19 18:10:52 2006
cp0: Firmwarecommit has completed successfully on Active CP.
 
[11]: Wed Apr 19 18:10:56 2006
cp0: Firmwaredownload command has completed successfully.
 
 
 
12000 EXAMPLE:
	sw12000:admin&gt; firmwareshow
	Local CP (Slot 5, CP0): Active
        	Primary partition:      v5.0.4a
        	Secondary Partition:    v5.0.4a
	Remote CP (Slot 6, CP1): Standby
        	Primary partition:      v5.0.4a
        	Secondary Partition:    v5.0.4a
 
 
Reference
---------
Brocade Fabric OS Administrator's Guide  version 5.0.1
Part No 53-0000518-09
Chapter 4 Maintaining Configurations and Firmware

README -- Last modified date:  Friday, May 12, 2006

</pre></body></html>