<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">OBSOLETE Patch-ID# 114709-01
Keywords: 6120 raid storage drive firmware
Synopsis: Obsoleted by: 114709-02 6120 Disk drive firmware
Date: Nov/03/2003


Install Requirements: See Special Install Instructions                      
                      
Solaris Release: 2.5.1 2.6 7 8 9

SunOS Release: 5.5.1 5.6 5.7 5.8 5.9

Unbundled Product: 6120 Firmware

Unbundled Release: N/A

Xref: 

Topic: 

Relevant Architectures: sparc
NOTE:
 *** Warning *** Warning *** Warning *** Warning *** Warning ***
	This patch release is for the 6120 ARRAY ONLY and NOT the
	T3 OR T3B Array OR THE NON RAID Storage Boxes.  
	If you are looking to update with the latest patch release, 
	for any of the above NON 6120 Drives please download their 
	respective patches.

BugId's fixed with this patch: 

Changes incorporated in this version: 

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

  6120.sh                # 6120 File Upload Utility
  patchtoc               # 6120.sh: Files to Upload To Target 6120
ST314680F.0307.fw disk drive f/w         # 6120 Storage Drive Firmware

Problem Description:

Please reference Install Instruction.

Patch Installation Instructions:
-------------------------------- 
 This patch includes a firmware uploading utility (6120.sh) that 
 simplifies transferring the contents of this patch to a StorEdge
 6120 system.   This script is intended for use on Solaris host 
 systems only.  To manually install the contents of this patch
 see the pertinent section below.
 
 *** Warning *** Warning *** Warning *** Warning *** Warning ***
 BEFORE attempting to load firmware on a StorEdge 6120 system, be sure to
 stop all IO activity from all attached host systems. All necessary host 
 preparations needed to sustain this procedure should be made before 
 starting.
 
  To update the 6120 system with the entire contents of this patch follow
  the steps below after quiesc'ing IOs from the host: 
 
 1. System Preparation
    -&gt; Once the patch has been downloaded to a Solaris host, 
       change directories to the patch directory and run the 
       following command:
 
	# pkgadd -d . PKG
 
	-&gt; Example: 
 
hoohoo/usr/PATCHES/TEST/114706-01&gt;pkgadd -d  .
 
The following packages are available:
  1  SUNW1211     Sun StorEdge (tm) 6120 Drive Firmware
    (sparc,i386) 2.0
 
    Select package(s) you wish to process (or 'all' to process
    all packages). (default: all) [?,??,q]:   &lt;--- Hit Return to select
 
    Processing package instance &lt;SUNW1211&gt; from &lt;/usr/PATCHES/TEST/114706-01&gt;
 
    Sun StorEdge (tm) 6120 Drive Firmware
    (sparc,i386) 2.0
    Copyright 2001 Sun Microsystems, Inc. All rights reserved.
    Copyright 2001 Sun Microsystems, Inc. Tous droits r\351serv\351s.
    Using &lt;/&gt; as the package base directory.
    ## Processing package information.
    ## Processing system information.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
 
    Installing Sun StorEdge (tm) 6120 Drive Firmware as &lt;SUNW1211&gt;
 
    ## Installing part 1 of 1.
    /var/sadm/swimages/114706-01/6120.sh
    /var/sadm/swimages/114706-01/README.114706-01
    /var/sadm/swimages/114706-01/ST336752F.0508.fw
    /var/sadm/swimages/114706-01/patchtoc
    [ verifying class &lt;none&gt; ]
 
    Installation of &lt;SUNW1211&gt; was successful.
 
    The following packages are available:
      1  SUNW1211     Sun StorEdge (tm) 6120 Drive Firmware
        (sparc,i386) 2.0
 
        Select package(s) you wish to process (or 'all' to process
        all packages). (default: all) [?,??,q]: q
 
 
	-&gt; The resultant files will be located in the following directory:
	   /var/sadm/swimages/114709-01
 
 2. Verify the 6120 system to be upgraded is reachable on the network:
 
         $ ping 6120
           6120 is alive
 
 3. Verify the 6120 system has a root password (the '6120.sh' patch utility 
    uses ftp to transfer the files to the 6120 which requires a root 
    password):
 
	    hdd39-44/net/hoohoo.ebay/usr/PATCHES/TEST&gt;telnet 10.4.36.123 
	    Trying 10.4.36.123...
	    Connected to 10.4.36.123.
	    Escape character is '^]'.
 
	    Unauthorized access is prohibited.
 
	    Login: root
        Password:       &lt;---- Must type password here
 
	    6120 Release 3.0.2 Fri Feb 14 17:08:38 PST 2003 (10.4.36.123)
	    Copyright (C) 1997-2003 Sun Microsystems, Inc.
	    All Rights Reserved.
 
	    qatest:/:&lt;1&gt;
 
   If no root password is set on the system, be sure to set one by logging 
   into the 6120 system and using the 'passwd' command.
 
 4. Transfer the contents of this patch to 6120 system 
 
    Note: There is limited space available in the 6120's reserved system 
          area.  Therefore, it is important to be sure there is 
          adequate space on the 6120 before proceeding with the 
          procedure to ftp firmware images to the unit.  It is
          not necessary to keep old images firmware, 
          on the 6120 once those images have been loaded.
 
      Manual File Installation
      ------------------------
 
	  -&gt; cd to the patch location where it copies the patch files.  
	     # cd /var/sadm/swimages/114709-01 
 
	  -&gt; Manually ftp the following files contained in this patch
		 to the corresponding directory on the 6120 system
 
		 Patch Source Location         6120 Destination
		 ---------------------         -----------------
		 ./ST314680F.0307.fw				       /ST314680F.0307.fw
 
      Automated File Installation
	  ---------------------------
 
	-&gt; cd to the patch location where it copies the patch files.  
	   # cd /var/sadm/swimages/114709-01 
 
	To start the installation script, first verify the target 6120
	system can be reached through the local network (use ping to verify
	the target 6120 system is reachable).  Once this has been confirmed,
	the installation script can be started as follows:
 
    ./6120.sh
 
		EXAMPLE:
        hoohoo/usr/PATCHES/TEST/114706-01&gt;cd /var/sadm/swimages/
        hoohoo/var/sadm/swimages&gt;ls
        114706-01
        hoohoo/var/sadm/swimages&gt;cd 114706-01
        hoohoo/var/sadm/swimages/114706-01&gt;ls
        6120.sh      README.114706-01   ST336752F.0508.fw  patchtoc
        hoohoo/var/sadm/swimages/114706-01&gt;./6120.sh
 
	(Note: Be sure the 6120.sh script is executable.)
 
	The utility will prompt for information as follows:
 
    Please Enter Hostname or IP Address Of 6120 To Be Upgraded:
 
		* Enter the Hostname or IP address of the target 6120
		  system
 
    Please Enter Patch Location Pathname [.]: 
 
        * Since you are already under the patch location you
		  can just hit return or specify the path as 
		  /var/sadm/swimages/114709-01
 
    Looking For Patch Contents In [.]...
    ----------------- ./patchtoc -------------------
    ST336752F.0508.fw image located
 
    Enter Your Home Directory Path [/]: 
 
	    * The home directory of the user ID used when launching the
		  6120.sh script (this is used by ftp to automatically load the patch
		  file contents to the 6120).
 
    Enter ftp user
 
        * Enter the default 6120 root login
 
    Enter ftp password
 
        * Enter the root password for the 6120
 
    At this point, the automatic ftp login/upload process should
	begin.
 
		EXAMPPLE:
        Creating Auto ftp File In [//.netrc]...
        Invoking ftp
        Connected to 10.4.36.123.
        220 10.4.36.123 pSOSystem FTP server (@(#)(#)pVER IA/MIPS, Version 3.1.0, Built on 12/03/1999) ready.
        331 Password required for root.
        230 User root logged in.
        bin
        200 Type set to I.
        prompt
        Interactive mode off.
        cd /
        250 CWD command successful.
        lcd /tmp/upload.8567
        Local directory now /tmp/upload.8567
        put ST336752F.0508.fw
        200 PORT command successful.
        150 Opening BINARY mode data connection for ST336752F.0508.fw
        226 Transfer complete.
        local: ST336752F.0508.fw remote: ST336752F.0508.fw
        602112 bytes sent in 34 seconds (17.34 Kbytes/s)
        quit
        221 Goodbye.
 
        Cleaning Up Temporary Files...
        hoohoo/var/sadm/swimages/114706-01&gt;
 
 5.  At this point login to the 6120 and type the following from 
	 the 6120 command to install the drive firmware
 
	  -&gt; Run disk download to download the firmware to the drives 
		 make sure the image is no more than 12 characters and follows 6120
		 naming convention
 
             EXAMPLE:
		     qatest:/:&lt;21&gt;disk download u2d01 ST336752F.0508.fw
		     u2d01  pass
 
         You can download to a single drive or all the drives in a trays
		 as shown in the following example:
 
			 EXAMPLE:
		     qatest:/:&lt;21&gt;disk download u2d01-u2d14 ST336752F.0508.fw
 
	  -&gt; Check the disk to verify download was successful
 
			 EXAMPLE:
		     qatest:/:&lt;22&gt;fru list u2d01
		     ID      TYPE               VENDOR       MODEL        REVISION       SERIAL
		     ------  -----------------  -----------  -----------  -------------  --------
		     u2d01   disk drive         SEAGATE      ST336752FSUN 0508           3ET0E3NM
 
      -&gt; Congratulations you have successfully installed the patch

Special Install Instructions:
-------------------------------------------
None.

README -- Last modified date:  Friday, January 16, 2004

</pre></body></html>