<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">OBSOLETE Patch-ID# 112488-09
Keywords: Sun Fire 15K SMS
Synopsis: Obsoleted by: 112488-10 SMS 1.2: hpost, redx, libxcpost Patch
Date: Oct/11/2002

Install Requirements: See Special Install Instructions                      
                      
Solaris Release: 8 9

SunOS Release: 5.8 5.9

Unbundled Product: System Management Services

Unbundled Release: 1.2

Xref: 

Topic: SMS 1.2: hpost, redx, libxcpost Patch

Relevant Architectures: sparc

BugId's fixed with this patch: 4525385 4531458 4533839 4548741 4587418 4587605 4599570 4614186 4615412 4616748 4616754 4617503 4619131 4619143 4621354 4622129 4630077 4633429 4635057 4635471 4635496 4636719 4638620 4638977 4640847 4641152 4649452 4649862 4652753 4658343 4661795 4663822 4664756 4669603 4672398 4673329 4675055 4676545 4676870 4677322 4680572 4682003 4693731 4696868 4712287 4716967 4717118 4722362 4724754 4724775 4725766 4729699 4732369 4732416 4732995 4733577 4735569 4745995 4747468

Changes incorporated in this version: 4696868 4716967 4717118 4722362 4724775 4725766 4729699 4732995 4733577 4735569 4745995 4747468

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWSMS/SMS1.2/bin/hpost
/opt/SUNWSMS/SMS1.2/bin/redx
/opt/SUNWSMS/SMS1.2/lib/libxcpost.so

Problem Description:

4696868 asic_config_dmx() doesn't clear 1stErr bits correctly
4716967 SDI RStop clear is also clearing DStop status
4717118 failing a cpu board fprom during cpu_lpost causes DSTOP
4722362 FAIL Man Ether Hub causes LDCD not be be written to IOSRAM.
4724775 hPOST fails trying to write man ether hub ID register
4725766 post should not be probing blacklisted WCI links
4729699 (RFE) wfail ecc recordstop improvements
4732995 hpost should accept lpost versions 5.13.1 through 5.13.3
4733577 redx wfail does not complete Bank/Dimm fault attribution
4735569 Check of DX in ECC tests must be suppressed on MaxCPU
4745995 (RFE) Desire LBIST support for AXQ 6.2 prior to qualification
4747468 Bogus "System Error xxxx: Unknown error" output
 
(from 112488-08)
 
4732369 post needs to increase the wait time during its auto-connect sequence
4732416 hpost needs to modify its auto-connect sequence to properly connect the Cauldron
 
(from 112488-07)
 
4661795 (RFE) POST support for new UltraSPARC III+ processors
4693731 AXQ &amp; SDI config read-modify-writes need to be atomic
4712287 EXB asic LBIST needs to be skipped when CP is in use.
4724754 null_proc_lpa ignored for hpost -Q
 
(from 112488-06)
 
4673329 asic_rstop_clr_dmx() does not clear 1stErr fields
4676545 hpost &amp; libxcpost functions must not clear pending interrupts
4676870 LPA use must be restricted with current hardware
4682003 wib_lpost stage complains of down-rev "elf" file when it's not
 
(from 112488-05)
 
4641152 replace cpu_lpost E$ UE fix with more effective solution in hpost.
4652753 vital entry in .postrc missing that prevented wcapp from working correctly
4658343 Post does not preserve the values of the IO board LEDs
4663822 MaxCPU board not dumped for Dstops during POST
4664756 hpost dumps core analyzing error on MaxCPU board.
4669603 POST should not report ecache dimms as FRUs
4672398 Need some .postrc commands externalized.
4675055 degrading/undegrading dbus can hang domains if rbus already degraded
4677322 POST should not report CDC dimms as FRUs.
4680572 Some sequences of mixed bus configurations are fatal.
 
(from 112488-04)
 
4635057 Post does not correctly auto connect cassettes on the hpci for the demios card
4635471 wfail misdiagnoses ecache UE recordstops.
4635496 libxcpost change required for MaxCPU DR
4636719 AMX/RMX RStop clear should not leave port error indicators masked
4638620 FAIL BBC may not fail correct ports
4638977 wcp_wci_read()/xcp_wci_write() can cause WCI pull_stop
4640847 wfail display of SDI local first errors causes confusion
4649452 deleteboard in degraded mode causes DStop; recovery fails; setbus normal fails
4649862 Remove up-level warning on Ethernet hub
 
(from 112488-03)
 
4525385 hpost needs to understand new LPOST version scheme
4548741 xcp_poll_server misses detection of OBP entry
4587605 AXQ revs 6.0 and 6.1 are interpreted incorrectly.
4599570 Running hpost -H on attach-ready IO0 causes DStop
4616748 Sequential hpost -H,f on same L1 board causes RStop in domain
4621354 Some degraded bus configurations can break SC interrupt delivery.
4622129 EXB domain masks not configured correctly in CP loopback mode
4633429 pcs_poll_servers(): exiting poll flow on PROC_INFO_NEXT_SCTEST
 
(from 112488-02)
 
4533839 Write/read-compare on Ethernet hub fails intermittently
4630077 Change dcu_features to a level-2 (service) command
 
(from 112488-01)
 
4531458 domain isolation not seen when degrading a domain using setbus
4587418 hpost -Q does not init all CPU state
4614186 dr in of unused exp causes DStop when target domain is degraded
4615412 hpost CPU timeouts in ProDomAdvR1 during hpost -H
4616754 hpost ignores the "attach-ready" state of L1 boards
4617503 hpost -Q needs to update DCB cbase and cbnd values
4619131 hpost needlessly locks all expanders in a domain when testing a single board
4619143 chunk list construction must use MADR information

Patch Installation Instructions:
--------------------------------
 
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-8 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
        example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.
 
See Also:  System Management Services (SMS) 1.2 Installation Guide and
           Release Notes, Part No. 816-2529-10
           Chapter 1, Patches

Special Install Instructions:
-----------------------------
 
Follow these steps when installing on the SC:
1. Record which SC is the main SC.
2. Disable failover on MAIN SC (setfailover off).
3. Stop the SMS processes on both SC's simultaneously.
        /etc/init.d/sms stop
4. Install the patch on both SC's.
5. Start the SMS processes on the previous main SC first.
        /etc/init.d/sms start
6. After all the sms processes have started (i.e. you're able to run the
   showenvironment command and get all the system's status),
   start the SMS processes on the Spare SC next.
7. Enable failover on MAIN SC (setfailover on).
 
Note:
  When upgrading from 112488-05 (or lower) to 112488-06 (or higher),
  all domains must undergo a setkeyswitch standby/on for the fix
  to 4676870 to be put into effect.
 
  When applying 112488-07 (or higher) the following lines should
  be removed from any/all .postrc files on the System Controllers:
 
     no_asic_lbist axq
     no_asic_lbist sdi
 
Note #2:
 
  This patch is for SMS 1.2. It installs on the SC. It should be installed
  on the main and spare sc's. It prevents certain dstops on domains on
  12K's and 15K's. However, even when installed on the System
  Controller, the patch is not effective until a hpost is run against the
  domain. In other words, a maintenance window needs to be set up
  to bring the domain down and setkeyswitch -on run against the
  domain to cause a hpost to run on the domain.

README -- Last modified date:  Friday, December 13, 2002

</pre></body></html>