Patch-ID# 110412-07 Keywords: Starfire SSP Synopsis: SSP 3.4: Eveready fan trays spin fast Date: Feb/17/2003 Install Requirements: None Solaris Release: 2.6 7 8 SunOS Release: 5.6 5.7 5.8 Unbundled Product: System Service Processor Unbundled Release: 3.4 Xref: Topic: SSP 3.4: Eveready fan trays spin fast Relevant Architectures: sparc BugId's fixed with this patch: 4325677 4325886 4378472 4405737 4417275 4451899 4454194 4475590 4478169 4504757 4527755 4630644 Changes incorporated in this version: 4475590 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /opt/SUNWssp/bin/edd /opt/SUNWssp/cbobjs/cbe.ima /opt/SUNWssp/library/scotty/actiontemp.tcl Problem Description: 4475590 procestemp reports "0.00" temperature values (from 110412-06) 4527755 lower Ambient Temperature Shutdown Setpoints and enable power off logic 4630644 ADC ring unlock failure for centerplane and control board (from 110412-05) 4325677 sysbrd_temp NOTICE message about ADC ring unlock failure. (from 110412-04) 4417275 procestemp reports "-0.00" temperature values 4504757 Version info log message needed from cbe.ima upon execution (from 110412-03) 4451899 all domains arbstopped after magic_cookie and libscan error reported to messages 4454194 multiple domains arbstopped when running autoconfig/hpost with jtag broken procs 4478169 cbe: ALERT: Help! Measured IC freq (93 MHz) does not match PLL setting (77 MHZ) (from 110412-02) 4405737 a fan tray mechanical trouble can cause any other fan tray to power off (from 110412-01) 4325886 Eveready fan trays spin fast 4378472 SSP reports power supply 5 missing when 4 power supplies is a legal config Patch Installation Instructions: -------------------------------- Refer to the Install.info file within the patch for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. Any other special or non-generic installation instructions should be described below. Special Install Instructions: ----------------------------- Follow these steps when installing on the MAIN SSP: 1. Shut off SSP failover according to the SSP 3.4 Users Guide 2. Stop the SSP processes: /etc/init.d/ssp stop 3. Install the patch 4. Run ssp_config: /opt/SUNWssp/bin/ssp_config 5. Enable SSP failover if it was running before. README -- Last modified date: Monday, February 17, 2003