Patch-ID# 109584-28 Keywords: rsc alarm netra ct vxwork firmware Synopsis: Netra ct 1.0: patch for Netra ct Alarm Card Firmware and Utilities Date: Aug/09/2004 Install Requirements: Reboot after installation Solaris Release: 8 9 NOTE: Solaris support : S8U3 for Netra CT400/800 with CP1500R S9 for Netra CT400/800 with CP1500R S9 for Netra CT400 with CP2140 SunOS Release: 5.8 5.9 Unbundled Product: Netra ct Unbundled Release: 1.0 Xref: Topic: Relevant Architectures: sparc BugId's fixed with this patch: 4312038 4319830 4320360 4335007 4335034 4337893 4338892 4340470 4341596 4343091 4343700 4343735 4345653 4346247 4347356 4347615 4349010 4349599 4350969 4352483 4354139 4358278 4358302 4358316 4358324 4358330 4358335 4358338 4358345 4358407 4358424 4358664 4361827 4364197 4364479 4365267 4369429 4369491 4369515 4369528 4378613 4383296 4384610 4385167 4385931 4386000 4387380 4387796 4387814 4388287 4388384 4389746 4390184 4394012 4394797 4402054 4406986 4407419 4408160 4409323 4409461 4411770 4415921 4422397 4425114 4433438 4444232 4444255 4445397 4445409 4490726 4515954 4684385 4701960 4832272 4834267 4874790 4958524 Changes incorporated in this version: 4958524 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/lib/images/rscfw /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/lib/librsc.so /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/lib/librsc.so.1 /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/rsc/rsc-config /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/rsc/rsc-initscript /usr/platform/SUNW,UltraSPARC-IIe-NetraCT-40/rsc/rscadm /usr/platform/SUNW,UltraSPARC-IIi-Netract/lib/images/rscfw /usr/platform/SUNW,UltraSPARC-IIi-Netract/lib/librsc.a /usr/platform/SUNW,UltraSPARC-IIi-Netract/lib/librsc.so /usr/platform/SUNW,UltraSPARC-IIi-Netract/lib/librsc.so.1 /usr/platform/SUNW,UltraSPARC-IIi-Netract/lib/mibs/netractrsc.mib /usr/platform/SUNW,UltraSPARC-IIi-Netract/rsc/rsc-config /usr/platform/SUNW,UltraSPARC-IIi-Netract/rsc/rsc-initscript /usr/platform/SUNW,UltraSPARC-IIi-Netract/rsc/rscadm Problem Description: 4958524 patch 109584-27.README needs to be revised (from 109584-27) 4874790 Need to check arguments in timespec_compare() librsc routine (from 109584-26) 4832272 rscadm download of RSC fw 2.1.2 causes alarm card hang 4834267 Tonga/Othello+/s9 rscadm resetrsc doesn't reset rsc whereas '-s' does (from 109584-25) 4701960 Packages in Netra_ct_Platform_1.0 fail Safe Default Permissions Test (from 109584-24) Enabled the DSR interrupt; Fixed the root cause for alarmcard hang in tty mode (from 109584-23) 4684385 Tonga system is unable to to perform full hot swap with new firmware (from 109584-22) 4388384 RSC PPP is not supported on serial port 2 (from 109584-21) 4515954 rsc-config script fails to configure rsc on alarm card (from 109584-20) 4490726 SUNWctac package should be modified include platform links for rscfw 4422397 Solaris needs to support Othello ( SUNW,UltraSPARC-IIe-NetraCT ) CPU (from 109584-19) 4387380 RSC configuration variable serial2_hw_handshake not functioning 4384610 serial port 1 not locked at 9600,N,8,1 4343700 rsc-config script is not configuring variables for alarm card serial port 2. 4320360 sys-unconfig could remove other rsc configuration variables 4409461 RSC paging alerts only at 9600 baud 4387796 RSC alerts not reported after n number events sent with rscadm send_event -c 4425114 Change in ct_sab82532Sio.c to support higher version of serial controller 4445409 Add new MIB variables: serial2_hw_flowcontrol and serial2_inactivity. 4444255 RSC ttyMonitor task stopped not logged in event log 4433438 Updated rsc-config to reflect change in page_initN string length 4445397 frequent invalid RSC logins on com2 after 6 ttyMonitor restarts 4444232 In rsc-config, serial 2 baud rate prompts for invalid baud rates (from 109584-18) 4409323 envmond stuck in reinitializing loop when RSC ip_mode not set to config. 4406986 RSC does not send email alert for shutdown temp event. 4411770 Alarm card COM2 do not drop the current login session when disconnected 4408160 Command 'version' missing from rscadm help display 4369528 3 instances for netraCtRscPowerSupplyIndex show via snmp, but max PSUs is 2 4358345 netraCtRscPowerSupplyCount object shows a value of 2 for netra ct 400 via snmp (from 109584-17) 4407419 Heartbeat failure during rscadm userpassword (from 109584-16) 4415921 Unable to reset hardware with rscadm resetrsc (from 109584-15) 4402054 rscadm not setting 80 chars for page_info1 and page_info2 4394797 Prompt for customerinfo in rsc-config script needs updated 4394012 weird message coming out from the RSC output 4390184 RSC snmp variable netraCtRscTemperatureValid is always false 4389746 Send event of only the six digits garbles RSC env display 4386000 Host does not reboot after reset via SNMP on alarm card RSC. 4385931 undoFailed error status returned from set on netraCtRscAdminBreak via SNMP 4385167 One space was missing in Alarm Card host name in RSC prompt 4369515 Cannot get or set 2 mailhost addresses for netraCtRscMailHostAddress via snmp 4358338 netraCtRscSystemType object does not return a value for system type through snmp (from 109584-14) 4388287 RSC modem_setup input causes heartbeat failures 4378613 rsc should flag invalid ip_netmask addresses 4385167 Include Alarm Card host name in RSC prompt 4319830 Make rsc-config script set RSC date/time without asking user (from 109584-13) 4387814 ttyvtest fails for all baud rates with the patch 109584-12 (from 109584-12) 4383296 Alarm card COM2 should support tty. (from 109584-11) 4358407 Cannot change setting of object instance netraCtRscAlarmAdminState.4 via snmp 4337893 public rscadm version command needed (from 109584-10) 4358664 Cannot display variable for netraCtRscConsoleReset object via snmp 4369429 Setting for netraCtRscModemParity variable shows bogus value via snmp 4350969 Extended vts testing or the rsc2.0 card causes the card to hang. 4369491 typo in rsc 'help' output (from 109584-09) 4364479 Alarm card serial2_xx variables to not change COM2 configuration 4365267 patchadd of 109584-05 fails with jumpstart install 4364197 /etc/iu.ap entry does not allow Alarm card to be hotswapped (from 109584-08) 4361827 rsc snmp agent not sending traps 4358424 Object instances netraCtRscFanPresent.X showing bogus values via snmp 4358335 Cannot change setting of object netraCtRscModemData through snmp 4358330 Cannot change setting of object netraCtRscModemStop through snmp 4358324 Cannot change setting of object netraCtRscSerial2Mode to disabled through snmp 4358316 Cannot change setting for netraCtRscSerial2Data object through snmp 4358302 Cannot change setting for object netraCtRscPanicDump through snmp 4358278 netraCtRscHostWatchDogTimeout object gets set to one through snmp 4312038 Range for RSCadm and RSCshell date command is different (from 109584-07) 4354139 rsc customerinfo and hostname strings greater than 40 chars are not flagged 4347356 customerinfo and hostname >= 10 chars displays as No Entry and Unknown in email 4343091 RSC sends only one alert for two simultaneous PSU failures (from 109584-06) 4346247 rsc console orun log not receiving panic messages upon panic and reset 4347615 Illegal Fru Type and debug messages showing up in RSC event log 4352483 CPU warning-temp alarm clears as temperature increases above warning temp (from 109584-05) 4343735 setsockopt invalid argument error upon 5th telnet session (from 109584-04) 4340470 no support for com2 on alarm card 4349599 RSC in reset loop after firmware download (from 109584-03) 4349010 Installation of SUNWctac does not fail gracefully (from 109584-02) 4335007 RSC console does not respond to input in single user mode after boot 4345653 Long rsc usernames over flow into permissions column of rscadm usershow printout 4341596 RSC heartbeat failure with rscadm set < (from 109584-01) 4335034 Unable to interrupt process from rsc console on com1 of alarm card 4338892 Solaris unexpectedly reboots when RSC date is sync'd to server's current date Patch Installation Instructions: -------------------------------- For Solaris 8 release, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/109584-01 The following example removes a patch from a standalone system: example# patchrm 109584-01 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- After running the 'patchadd' command described above, you must run the command, 'rscadm', to download the new image to the flash of the Alarm Card. example# cd /usr/platform/SUNW,UltraSPARC-IIi-Netract/rsc example# ./rscadm download ../lib/images/rscfw After the download has completed, the Alarm Card will reboot itself. The Alarm Card reboot & self-tests take approximately 40 seconds, afterwhich time, the Alarm Card will be available for use. ----------------------------- Firmware version contained in this patch: 2.1.2 The following command will retrieve the firmware version after this patch is installed. # pkgparam SUNWctac ALARM_CARD_FW_VERSION README -- Last modified date: Monday, August 9, 2004