orderly 1.0.3

• orderly::orderly_test_start prints instructions that are pasteable on windows – previously they may have contained backslashes (VIMC-3251).
• orderly::orderly_run now strips a leading src/ if provided, allowing easier tab-completion of report names (VIMC-3226).

orderly 1.0.2 (CRAN)

• orderly::orderly_test_check is no longer case sensitive with paths, preventing issues when used from directories that do not have canonical casing (VIMC-3205)

orderly 1.0.1

• In orderly to comply with CRAN policies, the functionality of orderly::orderly_test_start and related functions has been severely reduced. Functions orderly::orderly_test_end and orderly::orderly_test_restart have been removed and orderly::orderly_test_start no longer directly provides a useable environment for testing reports (VIMC-3178).

orderly 1.0.0

• Initial release to CRAN

orderly 0.8.1

• Parameters now accept defaults in orderly.yml, and the format has altered slightly (VIMC-2413, #8).

orderly 0.8.0

• Deprecated functions pull_archive, pull_dependencies, set_default_remote have been removed (VIMC-2946, deprecated in VIMC-2944 / 0.7.2).

orderly 0.7.16

• orderly_migrate can now clean up old migration backup files. These should generally be quite safe to delete, but it would be better to do this directly from orderly (VIMC-3157)

orderly 0.7.15

• Global resources can now be renamed on copy, allowing use of subdirectories to structure them. Using global resources as a set of strings is now deprecated (VIMC-2961).

orderly 0.7.14

• The command line interface has been overhauled, in particular the parameter passing interface (VIMC-2469) which now accepts key-value pairs and not json

orderly 0.7.13

• It is now possible to deduplicate an orderly archive using orderly::orderly_deduplicate (VIMC-731).

orderly 0.7.12

• orderly_run now checks for sink imbalance, in the same way that device imbalances are currently checked for, preventing odd errors when sinks are left open or too many are closed (VIMC-3129)

orderly 0.7.9

• All README files are copied into destination directory, not just top level (VIMC-3065)

orderly 0.7.7

• Pulling from remotes now imports the report into the local orderly db, and also pulls all dependent reports (VIMC-2855, VIMC-3054).

orderly 0.7.6

• Detection of modified dependencies has been improved (VIMC-2997).

orderly 0.7.5

• Fixes notifications to slack on report completion (VIMC-2992).

orderly 0.7.4

• The database configuration in orderly_config.yml now has an “args” section, rather than guessing arguments. Old configurations are valid, with a warning to update (VIMC-1986).

orderly 0.7.3

• Function orderly_unzip_archive / unzip_archive has been removed in preparation for release.
• Function push_archive (previously marked as experimental and not implemented for anything other than file remotes) has been removed. We may reconsider this again in the future.

orderly 0.7.2

• Functions pull_archive and pull_dependencies have been deprecated in favour of orderly_pull_archive and orderly_pull_dependencies (respectively). Similarly, set_default_remote becomes orderly_default_remote_set and orderly_default_remote_get is exported. unzip_archive becomes orderly_unzip_archive (VIMC-2944).

orderly 0.7.1

• Remove arguments open and extended_output from orderly_run as these were not widely used (VIMC-2945)

orderly 0.7.0

• The concept of “publishing” a report has been removed from orderly in preparation for it to be implemented entirely in OrderlyWeb (in the meantime it will be provided by orderly.server (VIMC-2941)

orderly 0.6.6

• The database schema now represents the “custom” fields in a way that makes it more obvious which fields are in fact custom, using new tables custom_fields (holding metadata about the fields) and report_version_custom_fields (linking these to the report versions) (VIMC-2768)

orderly 0.6.5

• The orderly “runner” (orderly_runner) will now periodically backup the destination database, which will be useful in cases where other applications store information in it (VIMC-2882)

orderly 0.6.4

• The config argument to exported functions has been renamed to root to better reflect what is expected to be passed in (VIMC-2919)

orderly 0.6.3

• The orderly_run.yml script has now been removed and orderly_run.rds is the sole source of truth for the orderly run metadata (VIMC-2873).

orderly 0.6.0

• Allow multiple databases (or no database) to be be used in the orderly configuration (VIMC-2795)

orderly 0.5.18

• Remove old db schema (VIMC-2769)

orderly 0.5.17

• README.md files are automatically copied as resources from source folder. Additionally it is an error to include README.md as an artefact (VIMC-2230)
• Fix passing of timeout through to remote runners when using the montagu package (VIMC-2517)

orderly 0.5.16

• The database schema now stores basic git information alongside report versions, if the report source archive uses git (VIMC-2615)
• The runner now recognises the master_only configuration option and can prevent running reports with references other than master. This is now enforced entirely on the server (VIMC-2642)
• The changelog table includes the attributable public report version attributable to each changelog entry

orderly 0.5.15

• orderly now prompts to install missing packages and offers code to help with this (VIMC-2384)
• orderly run on the command line accepts message entries (VIMC-2363, VIMC-1797)
• orderly checks that the resources were not modified during running a report (VIMC-2137)

orderly 0.5.14

• README.md is automatically treated as resource if present (VIMC-2230)
• Fix handling of remote environment variables (VIMC-2553)

orderly 0.5.13

• Removes support for shiny apps as this was poorly tested and not used by us (VIMC-2544, VIMC-2538).

orderly 0.5.12

• The montagu package is no longer used directly by orderly (VIMC-2453) - instead we use a similar “driver” approach to the database connections. This paves the way for an eventual CRAN release (VIMC-2421).

orderly 0.5.11

• Improvements to archive migration when local archive directories contain invalid files (VIMC-2449). orderly now indicates the version that failed to run, and can move failed versions aside to complete migration of the rest of an archive.

orderly 0.5.10

• Requires vaultr 0.2.0, which is a major overhaul of that package.

orderly 0.5.8

• Better error messages when unexpected files are found in the orderly archive (VIMC-1761)
• Include parameters used in the orderly database (VIMC-2397)
• Better error message when migration is needed (VIMC-2392)
• orderly works with report repository clones that lack an archive directory (VIMC-2383)

orderly 0.5.7

• Support for changelogs (VIMC-1503)

orderly 0.5.6

• The displayname and description fields are correctly copied into the new orderly database.

orderly 0.5.5

• New connection column in the report_version table in orderly’s database (VIMC-2327)

orderly 0.5.4

• New latest column in the report table in orderly’s database (VIMC-2298)

orderly 0.5.3

• Null entries are allowed in orderly_envir.yml

orderly 0.5.2

• Introduces “global resources” support for assets used in multiple reports that are not themselves dependencies.
• The database schema includes a published field (VIMC-2251)
• New option if_schema_changed to rebuild orderly database (orderly_rebuild) only on a schema change (VIMC-2280)

orderly 0.5.0

• Send a slack message after a report has been run from the commandline tool, and by extension the runner (VIMC-1931)
• New internal database structure (VIMC-1930)

orderly 0.4.8

• Fix running reports on montagu servers (VIMC-1911)

orderly 0.4.7

• Reset working directory if orderly_test_start fails on startup (VIMC-1870)
• Extend the templates to allow for multiple files and versions of templates (VIMC-1877)

orderly 0.4.6

• Also output times with orderly::orderly_run_info (#24/VIMC-1818)

orderly 0.4.5

• Copy a template report from the orderly/template.yml within the orderly root if available, then falling back on the version in the package.
• push_archive, the inverse of pull_archive for copying an archive report elsewhere (VIMC-1811). Currently only supported for remote as a path.
• orderly::orderly_run_info() can return information about the current run, including information on dependencies.

orderly 0.4.4

• Print total elapsed time taken to print report
• Runner can kill reports
• Git is reset to previous HEAD immediately after preparing workdir
• orderly_run gains a --fetch argument, used when --ref is specified to run git fetch before resolving ref
• The orderly runner looks up the sha for a ref at the point of queuing, rather than the point of running
• The cli tool gets a --pull and --fetch argument

orderly 0.4.1

• Support for adding a message to a report

orderly 0.4.0

• Support for downloading reports from locations other than montagu. This includes a breaking change, where the server argument to pull_dependencies and pull_report changes to remote. The structure here will probably change a little further in a future version.

orderly 0.3.4

• Support for creating “shiny apps” as artefacts