%% template.tex
%% from
%% bare_conf.tex
%% V1.4b
%% 2015/08/26
%% by Michael Shell
%% See:
%% http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.8b or later) with an IEEE
%% conference paper.
%%
%% Support sites:
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/pkg/ieeetran
%% and
%% http://www.ieee.org/

%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall the IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including  **
%% ** renaming them and changing author support contact information. **
%%*************************************************************************


% *** Authors should verify (and, if needed, correct) their LaTeX system  ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. The IEEE's font choices and paper sizes can   ***
% *** trigger bugs that do not appear when using other class files.       ***                          ***
% The testflow support page is at:
% http://www.michaelshell.org/tex/testflow/

\documentclass[conference,$if(fontsize)$$fontsize$,$endif$$if(draftmode)$$draftmode$,$endif$$if(papersize)$$papersize$,$endif$$for(classoption)$$classoption$$sep$,$endfor$]{IEEEtran}
% Some Computer Society conferences also require the compsoc mode option,
% but others use the standard conference format.
%
% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[conference]{../sty/IEEEtran}





% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)


% *** MISC UTILITY PACKAGES ***
%
$if(with_ifpdf)$
\usepackage{ifpdf}
$endif$
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
%   % pdf code
% \else
%   % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/pkg/ifpdf
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.






% *** CITATION PACKAGES ***
%
$if(with_cite)$
\usepackage{cite}
$endif$
%\usepackage{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of the IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off
% such as if a citation ever needs to be enclosed in parenthesis.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 5.0 (2009-03-20) and later if using hyperref.sty.
% The latest version can be obtained at:
% http://www.ctan.org/pkg/cite
% The documentation is contained in the cite.sty file itself.






% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
  % \usepackage[pdftex]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../pdf/}{../jpeg/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
  % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
  % will default to the driver specified in the system graphics.cfg if no
  % driver is specified.
  % \usepackage[dvips]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../eps/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation
% can be obtained at:
% http://www.ctan.org/pkg/graphicx
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found at:
% http://www.ctan.org/pkg/epslatex
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex





% *** MATH PACKAGES ***
%
$if(with_amsmath)$
\usepackage{amsmath}
\interdisplaylinepenalty=2500
$endif$
%\usepackage{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics.
%
% Note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/amsmath





% *** SPECIALIZED LIST PACKAGES ***
%
$if(with_algorithmic)$
\usepackage{algorithmic}
$endif$
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/pkg/algorithms
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/pkg/algorithmicx




% *** ALIGNMENT PACKAGES ***
%
$if(with_array)$
\usepackage{array}
$endif$
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/array


% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.




% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
%  \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
%  \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
% handling of captions.
% Note that the Computer Society format requires a larger sans serif font
% than the serif footnote size font used in traditional IEEE formatting
% and thus the need to invoke different subfig.sty package options depending
% on whether compsoc mode has been enabled.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig




% *** FLOAT PACKAGES ***
%
$if(with_dblfloatfix)$
\usepackage{dblfloatfix}
$endif$

%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure.
% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
% corrections already built into the system in which case a warning will
% be issued if an attempt is made to load fixltx2e.sty as it is no longer
% needed.
% The latest version and documentation can be found at:
% http://www.ctan.org/pkg/fixltx2e


%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/stfloats
% Do not use the stfloats baselinefloat ability as the IEEE does not allow
% \baselineskip to stretch. Authors submitting work to the IEEE should note
% that the IEEE rarely uses double column equations and that authors should try
% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
% such ways.
% Do not attempt to use stfloats with fixltx2e as they are incompatible.
% Instead, use Morten Hogholm'a dblfloatfix which combines the features
% of both fixltx2e and stfloats:
%
% \usepackage{dblfloatfix}
% The latest version can be found at:
% http://www.ctan.org/pkg/dblfloatfix




% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/url
% Basically, \url{my_url_here}.




% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex).         ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )



%% BEGIN MY ADDITIONS %%

$if(natbib)$
\usepackage{natbib}
\bibliographystyle{$if(biblio-style)$$biblio-style$$else$plainnat$endif$}
$endif$
$if(biblatex)$
\usepackage[backend=bibtex,citestyle=ieee,style=numeric$if(citation_sorting)$,sorting=$citation_sorting$$endif$]{biblatex}
$if(bibliography)$
$for(bibliography)$
\addbibresource{$bibliography$}
$endfor$
$endif$
$endif$

$if(tables)$
\usepackage{longtable,booktabs}
$endif$
$if(graphics)$
\usepackage{graphicx}
% We will generate all images so they have a width \maxwidth. This means
% that they will get their normal width if they fit onto the page, but
% are scaled down if they would overflow the margins.
\makeatletter
\def\maxwidth{\ifdim\Gin@nat@width>\linewidth\linewidth
\else\Gin@nat@width\fi}
\makeatother
\let\Oldincludegraphics\includegraphics
\renewcommand{\includegraphics}[1]{\Oldincludegraphics[width=\maxwidth]{#1}}
$endif$

\usepackage[unicode=true]{hyperref}

\hypersetup{
$if(title-meta)$
            pdftitle={$title-meta$},
$endif$
$if(author-meta)$
            pdfauthor={$author-meta$},
$endif$
$if(keywords)$
            pdfkeywords={$for(keywords)$$keywords$$sep$, $endfor$},
$endif$
$if(colorlinks)$
            colorlinks=true,
            linkcolor=$if(linkcolor)$$linkcolor$$else$Magenta$endif$,
            citecolor=$if(citecolor)$$citecolor$$else$Blue$endif$,
            urlcolor=$if(urlcolor)$$urlcolor$$else$Blue$endif$,
$else$
            pdfborder={0 0 0},
$endif$
            breaklinks=true}
\urlstyle{same}  % don't use monospace font for urls

% Pandoc toggle for numbering sections (defaults to be off)
$if(numbersections)$
\setcounter{secnumdepth}{$if(secnumdepth)$$secnumdepth$$else$5$endif$}
$else$
\setcounter{secnumdepth}{0}
$endif$

% Pandoc syntax highlighting
$if(highlighting-macros)$
$highlighting-macros$
$endif$

$if(csl-refs)$
\newlength{\cslhangindent}
\setlength{\cslhangindent}{1.5em}
\newenvironment{cslreferences}%
  {$if(csl-hanging-indent)$\setlength{\parindent}{0pt}%
  \everypar{\setlength{\hangindent}{\cslhangindent}}\ignorespaces$endif$}%
  {\par}
$endif$

% Pandoc header
$for(header-includes)$
$header-includes$
$endfor$

\providecommand{\tightlist}{%
  \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}

%% END MY ADDITIONS %%


\hyphenation{$hyphenfixes$}

\begin{document}
%
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{$title$}

% author names and affiliations
% use a multiple column layout for up to three different
% affiliations

\author{
$if(affiliation)$

%% ---- classic IEEETrans wide authors' list ----------------
$if(affiliation.wide)$
\IEEEauthorblockN{
$if(affiliation.author)$
$for(affiliation.author)$
$affiliation.author.name$\IEEEauthorrefmark{$affiliation.author.mark$}$sep$,
$endfor$
$else$
$if(affiliation.author_multiline)$
$for(affiliation.author_multiline)$
$for(affiliation.author_multiline.line)$
$affiliation.author_multiline.line.name$\IEEEauthorrefmark{$affiliation.author_multiline.line.mark$}
$sep$,
$endfor$
$sep$}\IEEEauthorblockN{
$endfor$
$else$
$for(affiliation.institution)$ %% -- beg for/affiliation.institution
$for(affiliation.institution.author)$  %% -- beg for/affiliation.institution.author
$affiliation.institution.author.name$\IEEEauthorrefmark{$affiliation.institution.mark$}
$sep$,
$endfor$ %% -- end for/affiliation.institution.author
$sep$,
$endfor$ %% -- end for/affiliation.institution
$endif$
$endif$
}

$for(affiliation.institution)$ %% -- beg for/affiliation.institution
\IEEEauthorblockA{\IEEEauthorrefmark{$affiliation.institution.mark$}
$if(affiliation.institution.department)$
$affiliation.institution.department$\\
$endif$
$affiliation.institution.name$,
$affiliation.institution.location$
$if(affiliation.institution.email)$
\\ $affiliation.institution.email$
$endif$
}
$endfor$ %% -- end for/affiliation.institution
$endif$ % -- end affiliation.wide
%% ----------------------------------------------------------



%% ---- classic IEEETrans one column per institution --------
$if(affiliation.institution-columnar)$ %% -- beg if/affiliation.institution-columnar
$for(affiliation.institution)$
\IEEEauthorblockN{
$for(affiliation.institution.author)$  %% -- beg for/affiliation.institution.author
$affiliation.institution.author.name$$sep$,
$endfor$ %% -- end for/affiliation.institution.author
}
\IEEEauthorblockA{$if(affiliation.institution.department)$
$affiliation.institution.department$\\
$endif$
$affiliation.institution.name$\\
$affiliation.institution.location$
$if(affiliation.institution.email)$
\\$affiliation.institution.email$
$else$
$for(affiliation.institution.author)$  %% -- beg for/affiliation.institution.author
$if(affiliation.institution.author.email)$
\\$affiliation.institution.author.email$
$endif$
$endfor$ %% -- end for/affiliation.institution.author
$endif$
}
$sep$\and
$endfor$ %% -- end for/affiliation.institution
$endif$ %% -- end if/affiliation.institution-columnar
%% ----------------------------------------------------------





%% ---- one column per author, classic/default IEEETrans ----
$if(affiliation.author-columnar)$ % -- beg affiliation.author-columnar
$for(affiliation.institution)$
$for(affiliation.institution.author)$  %% -- beg for/affiliation.institution.author
\IEEEauthorblockN{
$affiliation.institution.author.name$
}
\IEEEauthorblockA{$affiliation.institution.name$\\
$if(affiliation.institution.department)$
$affiliation.institution.department$\\
$endif$
$affiliation.institution.location$
$if(affiliation.institution.email)$
\\$affiliation.institution.email$
$else$
$for(affiliation.institution.author)$  %% -- beg for/affiliation.institution.author
$if(affiliation.institution.author.email)$
\\$affiliation.institution.author.email$
$endif$
$endfor$ %% -- end for/affiliation.institution.author
$endif$
}
$sep$\and
$endfor$ %% -- end for/affiliation.institution.author
$sep$\and
$endfor$ %% -- end for/affiliation.institution
$endif$ %% -- end if/affiliation.institution-columnar
%% ----------------------------------------------------------

$endif$
}

% conference papers do not typically use \thanks and this command
% is locked out in conference mode. If really needed, such as for
% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
% after \documentclass

% for over three affiliations, or if they all won't fit within the width
% of the page, use this alternative format:
%
%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
%Homer Simpson\IEEEauthorrefmark{2},
%James Kirk\IEEEauthorrefmark{3},
%Montgomery Scott\IEEEauthorrefmark{3} and
%Eldon Tyrell\IEEEauthorrefmark{4}}
%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
%Georgia Institute of Technology,
%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
%Email: homer@thesimpsons.com}
%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
%Telephone: (800) 555--1212, Fax: (888) 555--1212}
%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}




% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}




% make the title area
\maketitle

% As a general rule, do not put math, special symbols or citations
% in the abstract
\begin{abstract}
$abstract$
\end{abstract}

% keywords
$if(keywords)$
\begin{IEEEkeywords}
$for(keywords)$$keywords$$sep$; $endfor$
\end{IEEEkeywords}
$endif$

% use for special paper notices

$if(IEEEspecialpaper)$
\IEEEspecialpapernotice{$IEEEspecialpaper$}
$endif$


% make the title area
\maketitle

% no keywords

% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle

$for(include-before)$
$include-before$

$endfor$

$body$

$if(natbib)$
$if(biblio-files)$
$if(biblio-title)$
$if(book-class)$
\renewcommand\bibname{$biblio-title$}
$else$
\renewcommand\refname{$biblio-title$}
$endif$
$endif$
\bibliography{$biblio-files$}

$endif$
$endif$
$if(biblatex)$
\printbibliography$if(biblio-title)$[title=$biblio-title$]$endif$

$endif$
$for(include-after)$
$include-after$

$endfor$
\end{document}


