# Introduction to data.table

#### 2020-07-22

This vignette introduces the `data.table` syntax, its general form, how to subset rows, select and compute on columns, and perform aggregations by group. Familiarity with `data.frame` data structure from base R is useful, but not essential to follow this vignette.

## Data analysis using `data.table`

Data manipulation operations such as subset, group, update, join etc., are all inherently related. Keeping these related operations together allows for:

- concise and consistent syntax irrespective of the set of operations you would like to perform to achieve your end goal.

- performing analysis fluidly without the cognitive burden of having to map each operation to a particular function from a potentially huge set of functions available before performing the analysis.

- automatically optimising operations internally, and very effectively, by knowing precisely the data required for each operation, leading to very fast and memory efficient code.

Briefly, if you are interested in reducing programming and compute time tremendously, then this package is for you. The philosophy that `data.table` adheres to makes this possible. Our goal is to illustrate it through this series of vignettes.

## Data

In this vignette, we will use NYC-flights14 data obtained by flights package (available on GitHub only). It contains On-Time flights data from the Bureau of Transporation Statistics for all the flights that departed from New York City airports in 2014 (inspired by nycflights13). The data is available only for Jan-Oct’14.

We can use `data.table`’s fast-and-friendly file reader `fread` to load `flights` directly as follows:

    input <- if (file.exists("flights14.csv")) {
       "flights14.csv"
    } else {
      "https://raw.githubusercontent.com/Rdatatable/data.table/master/vignettes/flights14.csv"
    }
    flights <- fread(input)
    flights
    #         year month day dep_delay arr_delay carrier origin dest air_time distance hour
    #      1: 2014     1   1        14        13      AA    JFK  LAX      359     2475    9
    #      2: 2014     1   1        -3        13      AA    JFK  LAX      363     2475   11
    #      3: 2014     1   1         2         9      AA    JFK  LAX      351     2475   19
    #      4: 2014     1   1        -8       -26      AA    LGA  PBI      157     1035    7
    #      5: 2014     1   1         2         1      AA    JFK  LAX      350     2475   13
    #     ---
    # 253312: 2014    10  31         1       -30      UA    LGA  IAH      201     1416   14
    # 253313: 2014    10  31        -5       -14      UA    EWR  IAH      189     1400    8
    # 253314: 2014    10  31        -8        16      MQ    LGA  RDU       83      431   11
    # 253315: 2014    10  31        -4        15      MQ    LGA  DTW       75      502   11
    # 253316: 2014    10  31        -5         1      MQ    LGA  SDF      110      659    8
    dim(flights)
    # [1] 253316     11

Aside: `fread` accepts `http` and `https` URLs directly as well as operating system commands such as `sed` and `awk` output. See `?fread` for examples.

## Introduction

In this vignette, we will

1. Start with basics - what is a `data.table`, its general form, how to subset rows, how to select and compute on columns;

2. Then we will look at performing data aggregations by group

## 1. Basics

### a) What is `data.table`?

`data.table` is an R package that provides an enhanced version of `data.frame`s, which are the standard data structure for storing data in `base` R. In the Data section above, we already created a `data.table` using `fread()`. We can also create one using the `data.table()` function. Here is an example:

    DT = data.table(
      ID = c("b","b","b","a","a","c"),
      a = 1:6,
      b = 7:12,
      c = 13:18
    )
    DT
    #    ID a  b  c
    # 1:  b 1  7 13
    # 2:  b 2  8 14
    # 3:  b 3  9 15
    # 4:  a 4 10 16
    # 5:  a 5 11 17
    # 6:  c 6 12 18
    class(DT$ID)
    # [1] "character"

You can also convert existing objects to a `data.table` using `setDT()` (for `data.frame`s and `list`s) and `as.data.table()` (for other structures); the difference is beyond the scope of this vignette, see `?setDT` and `?as.data.table` for more details.

#### Note that:

- Unlike `data.frame`s, columns of `character` type are never converted to `factors` by default.

- Row numbers are printed with a `:` in order to visually separate the row number from the first column.

- When the number of rows to print exceeds the global option `datatable.print.nrows` (default = 100), it automatically prints only the top 5 and bottom 5 rows (as can be seen in the Data section). If you’ve had a lot of experience with `data.frame`s, you may have found yourself waiting around while larger tables print-and-page, sometimes seemingly endlessly. You can query the default number like so:

      getOption("datatable.print.nrows")

- `data.table` doesn’t set or use row names, ever. We will see why in the “Keys and fast binary search based subset” vignette.

### b) General form - in what way is a `data.table` enhanced?

In contrast to a `data.frame`, you can do a lot more than just subsetting rows and selecting columns within the frame of a `data.table`, i.e., within `[ ... ]` (NB: we might also refer to writing things inside `DT[...]` as “querying `DT`”, in analogy to SQL). To understand it we will have to first look at the general form of `data.table` syntax, as shown below:

    DT[i, j, by]

    ##   R:                 i                 j        by
    ## SQL:  where | order by   select | update  group by

Users who have an SQL background might perhaps immediately relate to this syntax.

#### The way to read it (out loud) is:

Take `DT`, subset/reorder rows using `i`, then calculate `j`, grouped by `by`.

Let’s begin by looking at `i` and `j` first - subsetting rows and operating on columns.

### c) Subset rows in `i`

#### – Get all the flights with “JFK” as the origin airport in the month of June.

    ans <- flights[origin == "JFK" & month == 6L]
    head(ans)
    #    year month day dep_delay arr_delay carrier origin dest air_time distance hour
    # 1: 2014     6   1        -9        -5      AA    JFK  LAX      324     2475    8
    # 2: 2014     6   1       -10       -13      AA    JFK  LAX      329     2475   12
    # 3: 2014     6   1        18        -1      AA    JFK  LAX      326     2475    7
    # 4: 2014     6   1        -6       -16      AA    JFK  LAX      320     2475   10
    # 5: 2014     6   1        -4       -45      AA    JFK  LAX      326     2475   18
    # 6: 2014     6   1        -6       -23      AA    JFK  LAX      329     2475   14

####

- Within the frame of a `data.table`, columns can be referred to as if they are variables, much like in SQL or Stata. Therefore, we simply refer to `origin` and `month` as if they are variables. We do not need to add the prefix `flights$` each time. Nevertheless, using `flights$origin` and `flights$month` would work just fine.

- The row indices that satisfy the condition `origin == "JFK" & month == 6L` are computed, and since there is nothing else left to do, all columns from `flights` at rows corresponding to those row indices are simply returned as a `data.table`.

- A comma after the condition in `i` is not required. But `flights[origin == "JFK" & month == 6L, ]` would work just fine. In `data.frame`s, however, the comma is necessary.

#### – Get the first two rows from `flights`.

    ans <- flights[1:2]
    ans
    #    year month day dep_delay arr_delay carrier origin dest air_time distance hour
    # 1: 2014     1   1        14        13      AA    JFK  LAX      359     2475    9
    # 2: 2014     1   1        -3        13      AA    JFK  LAX      363     2475   11

####

- In this case, there is no condition. The row indices are already provided in `i`. We therefore return a `data.table` with all columns from `flights` at rows for those row indices.

#### – Sort `flights` first by column `origin` in ascending order, and then by `dest` in descending order:

We can use the R function `order()` to accomplish this.

    ans <- flights[order(origin, -dest)]
    head(ans)
    #    year month day dep_delay arr_delay carrier origin dest air_time distance hour
    # 1: 2014     1   5         6        49      EV    EWR  XNA      195     1131    8
    # 2: 2014     1   6         7        13      EV    EWR  XNA      190     1131    8
    # 3: 2014     1   7        -6       -13      EV    EWR  XNA      179     1131    8
    # 4: 2014     1   8        -7       -12      EV    EWR  XNA      184     1131    8
    # 5: 2014     1   9        16         7      EV    EWR  XNA      181     1131    8
    # 6: 2014     1  13        66        66      EV    EWR  XNA      188     1131    9

#### `order()` is internally optimised

- We can use “-” on a `character` columns within the frame of a `data.table` to sort in decreasing order.

- In addition, `order(...)` within the frame of a `data.table` uses `data.table`’s internal fast radix order `forder()`. This sort provided such a compelling improvement over R’s `base::order` that the R project adopted the `data.table` algorithm as its default sort in 2016 for R 3.3.0, see `?sort` and the R Release NEWS.

We will discuss `data.table`’s fast order in more detail in the `data.table` internals vignette.

### d) Select column(s) in `j`

#### – Select `arr_delay` column, but return it as a vector.

    ans <- flights[, arr_delay]
    head(ans)
    # [1]  13  13   9 -26   1   0

####

- Since columns can be referred to as if they are variables within the frame of `data.table`s, we directly refer to the variable we want to subset. Since we want all the rows, we simply skip `i`.

- It returns all the rows for the column `arr_delay`.

#### – Select `arr_delay` column, but return as a `data.table` instead.

    ans <- flights[, list(arr_delay)]
    head(ans)
    #    arr_delay
    # 1:        13
    # 2:        13
    # 3:         9
    # 4:       -26
    # 5:         1
    # 6:         0

####

- We wrap the variables (column names) within `list()`, which ensures that a `data.table` is returned. In case of a single column name, not wrapping with `list()` returns a vector instead, as seen in the previous example.

- `data.table` also allows wrapping columns with `.()` instead of `list()`. It is an alias to `list()`; they both mean the same. Feel free to use whichever you prefer; we have noticed most users seem to prefer `.()` for conciseness, so we will continue to use `.()` hereafter.

`data.table`s (and `data.frame`s) are internally `list`s as well, with the stipulation that each element has the same length and the `list` has a `class` attribute. Allowing `j` to return a `list` enables converting and returning `data.table` very efficiently.

#### Tip:

As long as `j-expression` returns a `list`, each element of the list will be converted to a column in the resulting `data.table`. This makes `j` quite powerful, as we will see shortly. It is also very important to understand this for when you’d like to make more complicated queries!!

#### – Select both `arr_delay` and `dep_delay` columns.

    ans <- flights[, .(arr_delay, dep_delay)]
    head(ans)
    #    arr_delay dep_delay
    # 1:        13        14
    # 2:        13        -3
    # 3:         9         2
    # 4:       -26        -8
    # 5:         1         2
    # 6:         0         4

    ## alternatively
    # ans <- flights[, list(arr_delay, dep_delay)]

####

- Wrap both columns within `.()`, or `list()`. That’s it.

#### – Select both `arr_delay` and `dep_delay` columns and rename them to `delay_arr` and `delay_dep`.

Since `.()` is just an alias for `list()`, we can name columns as we would while creating a `list`.

    ans <- flights[, .(delay_arr = arr_delay, delay_dep = dep_delay)]
    head(ans)
    #    delay_arr delay_dep
    # 1:        13        14
    # 2:        13        -3
    # 3:         9         2
    # 4:       -26        -8
    # 5:         1         2
    # 6:         0         4

That’s it.

### e) Compute or do in `j`

#### – How many trips have had total delay < 0?

    ans <- flights[, sum( (arr_delay + dep_delay) < 0 )]
    ans
    # [1] 141814

#### What’s happening here?

- `data.table`’s `j` can handle more than just selecting columns - it can handle expressions, i.e., computing on columns. This shouldn’t be surprising, as columns can be referred to as if they are variables. Then we should be able to compute by calling functions on those variables. And that’s what precisely happens here.

### f) Subset in `i` and do in `j`

#### – Calculate the average arrival and departure delay for all flights with “JFK” as the origin airport in the month of June.

    ans <- flights[origin == "JFK" & month == 6L,
                   .(m_arr = mean(arr_delay), m_dep = mean(dep_delay))]
    ans
    #       m_arr    m_dep
    # 1: 5.839349 9.807884

####

- We first subset in `i` to find matching row indices where `origin` airport equals `"JFK"`, and `month` equals `6L`. We do not subset the entire `data.table` corresponding to those rows yet.

- Now, we look at `j` and find that it uses only two columns. And what we have to do is to compute their `mean()`. Therefore we subset just those columns corresponding to the matching rows, and compute their `mean()`.

Because the three main components of the query (`i`, `j` and `by`) are together inside `[...]`, `data.table` can see all three and optimise the query altogether before evaluation, not each separately. We are able to therefore avoid the entire subset (i.e., subsetting the columns besides `arr_delay` and `dep_delay`), for both speed and memory efficiency.

#### – How many trips have been made in 2014 from “JFK” airport in the month of June?

    ans <- flights[origin == "JFK" & month == 6L, length(dest)]
    ans
    # [1] 8422

The function `length()` requires an input argument. We just needed to compute the number of rows in the subset. We could have used any other column as input argument to `length()` really. This approach is reminiscent of `SELECT COUNT(dest) FROM flights WHERE origin = 'JFK' AND month = 6` in SQL.

This type of operation occurs quite frequently, especially while grouping (as we will see in the next section), to the point where `data.table` provides a special symbol `.N` for it.

#### Special symbol `.N`:

`.N` is a special built-in variable that holds the number of observations in the current group. It is particularly useful when combined with `by` as we’ll see in the next section. In the absence of group by operations, it simply returns the number of rows in the subset.

So we can now accomplish the same task by using `.N` as follows:

    ans <- flights[origin == "JFK" & month == 6L, .N]
    ans
    # [1] 8422

####

- Once again, we subset in `i` to get the row indices where `origin` airport equals “JFK”, and `month` equals 6.

- We see that `j` uses only `.N` and no other columns. Therefore the entire subset is not materialised. We simply return the number of rows in the subset (which is just the length of row indices).

- Note that we did not wrap `.N` with `list()` or `.()`. Therefore a vector is returned.

We could have accomplished the same operation by doing `nrow(flights[origin == "JFK" & month == 6L])`. However, it would have to subset the entire `data.table` first corresponding to the row indices in `i` and then return the rows using `nrow()`, which is unnecessary and inefficient. We will cover this and other optimisation aspects in detail under the `data.table` design vignette.

### g) Great! But how can I refer to columns by names in `j` (like in a `data.frame`)?

If you’re writing out the column names explicitly, there’s no difference vis-a-vis `data.frame` (since v1.9.8).

#### – Select both `arr_delay` and `dep_delay` columns the `data.frame` way.

    ans <- flights[, c("arr_delay", "dep_delay")]
    head(ans)
    #    arr_delay dep_delay
    # 1:        13        14
    # 2:        13        -3
    # 3:         9         2
    # 4:       -26        -8
    # 5:         1         2
    # 6:         0         4

If you’ve stored the desired columns in a character vector, there are two options: Using the `..` prefix, or using the `with` argument.

#### – Select columns named in a variable using the `..` prefix

    select_cols = c("arr_delay", "dep_delay")
    flights[ , ..select_cols]
    #         arr_delay dep_delay
    #      1:        13        14
    #      2:        13        -3
    #      3:         9         2
    #      4:       -26        -8
    #      5:         1         2
    #     ---
    # 253312:       -30         1
    # 253313:       -14        -5
    # 253314:        16        -8
    # 253315:        15        -4
    # 253316:         1        -5

For those familiar with the Unix terminal, the `..` prefix should be reminiscent of the “up-one-level” command, which is analogous to what’s happening here – the `..` signals to `data.table` to look for the `select_cols` variable “up-one-level”, i.e., in the global environment in this case.

#### – Select columns named in a variable using `with = FALSE`

    flights[ , select_cols, with = FALSE]
    #         arr_delay dep_delay
    #      1:        13        14
    #      2:        13        -3
    #      3:         9         2
    #      4:       -26        -8
    #      5:         1         2
    #     ---
    # 253312:       -30         1
    # 253313:       -14        -5
    # 253314:        16        -8
    # 253315:        15        -4
    # 253316:         1        -5

The argument is named `with` after the R function `with()` because of similar functionality. Suppose you have a `data.frame` `DF` and you’d like to subset all rows where `x > 1`. In `base` R you can do the following:

    DF = data.frame(x = c(1,1,1,2,2,3,3,3), y = 1:8)

    ## (1) normal way
    DF[DF$x > 1, ] # data.frame needs that ',' as well
    #   x y
    # 4 2 4
    # 5 2 5
    # 6 3 6
    # 7 3 7
    # 8 3 8

    ## (2) using with
    DF[with(DF, x > 1), ]
    #   x y
    # 4 2 4
    # 5 2 5
    # 6 3 6
    # 7 3 7
    # 8 3 8

- Using `with()` in (2) allows using `DF`’s column `x` as if it were a variable.

  Hence the argument name `with` in `data.table`. Setting `with = FALSE` disables the ability to refer to columns as if they are variables, thereby restoring the “`data.frame` mode”.

- We can also deselect columns using `-` or `!`. For example:

      ## not run

      # returns all columns except arr_delay and dep_delay
      ans <- flights[, !c("arr_delay", "dep_delay")]
      # or
      ans <- flights[, -c("arr_delay", "dep_delay")]

- From `v1.9.5+`, we can also select by specifying start and end column names, e.g., `year:day` to select the first three columns.

      ## not run

      # returns year,month and day
      ans <- flights[, year:day]
      # returns day, month and year
      ans <- flights[, day:year]
      # returns all columns except year, month and day
      ans <- flights[, -(year:day)]
      ans <- flights[, !(year:day)]

  This is particularly handy while working interactively.

`with = TRUE` is the default in `data.table` because we can do much more by allowing `j` to handle expressions - especially when combined with `by`, as we’ll see in a moment.

## 2. Aggregations

We’ve already seen `i` and `j` from `data.table`’s general form in the previous section. In this section, we’ll see how they can be combined together with `by` to perform operations by group. Let’s look at some examples.

### a) Grouping using `by`

#### – How can we get the number of trips corresponding to each origin airport?

    ans <- flights[, .(.N), by = .(origin)]
    ans
    #    origin     N
    # 1:    JFK 81483
    # 2:    LGA 84433
    # 3:    EWR 87400

    ## or equivalently using a character vector in 'by'
    # ans <- flights[, .(.N), by = "origin"]

####

- We know `.N` is a special variable that holds the number of rows in the current group. Grouping by `origin` obtains the number of rows, `.N`, for each group.

- By doing `head(flights)` you can see that the origin airports occur in the order “JFK”, “LGA” and “EWR”. The original order of grouping variables is preserved in the result. This is important to keep in mind!

- Since we did not provide a name for the column returned in `j`, it was named `N` automatically by recognising the special symbol `.N`.

- `by` also accepts a character vector of column names. This is particularly useful for coding programmatically, e.g., designing a function with the grouping columns as a (`character` vector) function argument.

- When there’s only one column or expression to refer to in `j` and `by`, we can drop the `.()` notation. This is purely for convenience. We could instead do:

      ans <- flights[, .N, by = origin]
      ans
      #    origin     N
      # 1:    JFK 81483
      # 2:    LGA 84433
      # 3:    EWR 87400

  We’ll use this convenient form wherever applicable hereafter.

#### – How can we calculate the number of trips for each origin airport for carrier code `"AA"`?

The unique carrier code `"AA"` corresponds to American Airlines Inc.

    ans <- flights[carrier == "AA", .N, by = origin]
    ans
    #    origin     N
    # 1:    JFK 11923
    # 2:    LGA 11730
    # 3:    EWR  2649

####

- We first obtain the row indices for the expression `carrier == "AA"` from `i`.

- Using those row indices, we obtain the number of rows while grouped by `origin`. Once again no columns are actually materialised here, because the `j-expression` does not require any columns to be actually subsetted and is therefore fast and memory efficient.

#### – How can we get the total number of trips for each `origin, dest` pair for carrier code `"AA"`?

    ans <- flights[carrier == "AA", .N, by = .(origin, dest)]
    head(ans)
    #    origin dest    N
    # 1:    JFK  LAX 3387
    # 2:    LGA  PBI  245
    # 3:    EWR  LAX   62
    # 4:    JFK  MIA 1876
    # 5:    JFK  SEA  298
    # 6:    EWR  MIA  848

    ## or equivalently using a character vector in 'by'
    # ans <- flights[carrier == "AA", .N, by = c("origin", "dest")]

####

- `by` accepts multiple columns. We just provide all the columns by which to group by. Note the use of `.()` again in `by` – again, this is just shorthand for `list()`, and `list()` can be used here as well. Again, we’ll stick with `.()` in this vignette.

#### – How can we get the average arrival and departure delay for each `orig,dest` pair for each month for carrier code `"AA"`?

    ans <- flights[carrier == "AA",
            .(mean(arr_delay), mean(dep_delay)),
            by = .(origin, dest, month)]
    ans
    #      origin dest month         V1         V2
    #   1:    JFK  LAX     1   6.590361 14.2289157
    #   2:    LGA  PBI     1  -7.758621  0.3103448
    #   3:    EWR  LAX     1   1.366667  7.5000000
    #   4:    JFK  MIA     1  15.720670 18.7430168
    #   5:    JFK  SEA     1  14.357143 30.7500000
    #  ---
    # 196:    LGA  MIA    10  -6.251799 -1.4208633
    # 197:    JFK  MIA    10  -1.880184  6.6774194
    # 198:    EWR  PHX    10  -3.032258 -4.2903226
    # 199:    JFK  MCO    10 -10.048387 -1.6129032
    # 200:    JFK  DCA    10  16.483871 15.5161290

####

- Since we did not provide column names for the expressions in `j`, they were automatically generated as `V1` and `V2`.

- Once again, note that the input order of grouping columns is preserved in the result.

Now what if we would like to order the result by those grouping columns `origin`, `dest` and `month`?

### b) Sorted `by`: `keyby`

`data.table` retaining the original order of groups is intentional and by design. There are cases when preserving the original order is essential. But at times we would like to automatically sort by the variables in our grouping.

#### – So how can we directly order by all the grouping variables?

    ans <- flights[carrier == "AA",
            .(mean(arr_delay), mean(dep_delay)),
            keyby = .(origin, dest, month)]
    ans
    #      origin dest month         V1         V2
    #   1:    EWR  DFW     1   6.427673 10.0125786
    #   2:    EWR  DFW     2  10.536765 11.3455882
    #   3:    EWR  DFW     3  12.865031  8.0797546
    #   4:    EWR  DFW     4  17.792683 12.9207317
    #   5:    EWR  DFW     5  18.487805 18.6829268
    #  ---
    # 196:    LGA  PBI     1  -7.758621  0.3103448
    # 197:    LGA  PBI     2  -7.865385  2.4038462
    # 198:    LGA  PBI     3  -5.754098  3.0327869
    # 199:    LGA  PBI     4 -13.966667 -4.7333333
    # 200:    LGA  PBI     5 -10.357143 -6.8571429

####

- All we did was to change `by` to `keyby`. This automatically orders the result by the grouping variables in increasing order. In fact, due to the internal implementation of `by` first requiring a sort before recovering the original table’s order, `keyby` is typically faster than `by` because it doesn’t require this second step.

Keys: Actually `keyby` does a little more than just ordering. It also sets a key after ordering by setting an `attribute` called `sorted`.

We’ll learn more about `keys` in the Keys and fast binary search based subset vignette; for now, all you have to know is that you can use `keyby` to automatically order the result by the columns specified in `by`.

### c) Chaining

Let’s reconsider the task of getting the total number of trips for each `origin, dest` pair for carrier “AA”.

    ans <- flights[carrier == "AA", .N, by = .(origin, dest)]

#### – How can we order `ans` using the columns `origin` in ascending order, and `dest` in descending order?

We can store the intermediate result in a variable, and then use `order(origin, -dest)` on that variable. It seems fairly straightforward.

    ans <- ans[order(origin, -dest)]
    head(ans)
    #    origin dest    N
    # 1:    EWR  PHX  121
    # 2:    EWR  MIA  848
    # 3:    EWR  LAX   62
    # 4:    EWR  DFW 1618
    # 5:    JFK  STT  229
    # 6:    JFK  SJU  690

####

- Recall that we can use `-` on a `character` column in `order()` within the frame of a `data.table`. This is possible to due `data.table`’s internal query optimisation.

- Also recall that `order(...)` with the frame of a `data.table` is automatically optimised to use `data.table`’s internal fast radix order `forder()` for speed.

But this requires having to assign the intermediate result and then overwriting that result. We can do one better and avoid this intermediate assignment to a temporary variable altogether by chaining expressions.

    ans <- flights[carrier == "AA", .N, by = .(origin, dest)][order(origin, -dest)]
    head(ans, 10)
    #     origin dest    N
    #  1:    EWR  PHX  121
    #  2:    EWR  MIA  848
    #  3:    EWR  LAX   62
    #  4:    EWR  DFW 1618
    #  5:    JFK  STT  229
    #  6:    JFK  SJU  690
    #  7:    JFK  SFO 1312
    #  8:    JFK  SEA  298
    #  9:    JFK  SAN  299
    # 10:    JFK  ORD  432

####

- We can tack expressions one after another, forming a chain of operations, i.e., `DT[ ... ][ ... ][ ... ]`.

- Or you can also chain them vertically:

      DT[ ...
         ][ ...
           ][ ...
             ]

### d) Expressions in `by`

#### – Can `by` accept expressions as well or does it just take columns?

Yes it does. As an example, if we would like to find out how many flights started late but arrived early (or on time), started and arrived late etc…

    ans <- flights[, .N, .(dep_delay>0, arr_delay>0)]
    ans
    #    dep_delay arr_delay      N
    # 1:      TRUE      TRUE  72836
    # 2:     FALSE      TRUE  34583
    # 3:     FALSE     FALSE 119304
    # 4:      TRUE     FALSE  26593

####

- The last row corresponds to `dep_delay > 0 = TRUE` and `arr_delay > 0 = FALSE`. We can see that 26593 flights started late but arrived early (or on time).

- Note that we did not provide any names to `by-expression`. Therefore, names have been automatically assigned in the result. As with `j`, you can name these expressions as you would elements of any `list`, e.g. `DT[, .N, .(dep_delayed = dep_delay>0, arr_delayed = arr_delay>0)]`.

- You can provide other columns along with expressions, for example: `DT[, .N, by = .(a, b>0)]`.

### e) Multiple columns in `j` - `.SD`

#### – Do we have to compute `mean()` for each column individually?

It is of course not practical to have to type `mean(myCol)` for every column one by one. What if you had 100 columns to average `mean()`?

How can we do this efficiently, concisely? To get there, refresh on this tip - “As long as the `j`-expression returns a `list`, each element of the `list` will be converted to a column in the resulting `data.table`”. Suppose we can refer to the data subset for each group as a variable while grouping, then we can loop through all the columns of that variable using the already- or soon-to-be-familiar base function `lapply()`. No new names to learn specific to `data.table`.

#### Special symbol `.SD`:

`data.table` provides a special symbol, called `.SD`. It stands for Subset of Data. It by itself is a `data.table` that holds the data for the current group defined using `by`.

Recall that a `data.table` is internally a `list` as well with all its columns of equal length.

Let’s use the `data.table` `DT` from before to get a glimpse of what `.SD` looks like.

    DT
    #    ID a  b  c
    # 1:  b 1  7 13
    # 2:  b 2  8 14
    # 3:  b 3  9 15
    # 4:  a 4 10 16
    # 5:  a 5 11 17
    # 6:  c 6 12 18

    DT[, print(.SD), by = ID]
    #    a b  c
    # 1: 1 7 13
    # 2: 2 8 14
    # 3: 3 9 15
    #    a  b  c
    # 1: 4 10 16
    # 2: 5 11 17
    #    a  b  c
    # 1: 6 12 18
    # Empty data.table (0 rows and 1 cols): ID

####

- `.SD` contains all the columns except the grouping columns by default.

- It is also generated by preserving the original order - data corresponding to `ID = "b"`, then `ID = "a"`, and then `ID = "c"`.

To compute on (multiple) columns, we can then simply use the base R function `lapply()`.

    DT[, lapply(.SD, mean), by = ID]
    #    ID   a    b    c
    # 1:  b 2.0  8.0 14.0
    # 2:  a 4.5 10.5 16.5
    # 3:  c 6.0 12.0 18.0

####

- `.SD` holds the rows corresponding to columns `a`, `b` and `c` for that group. We compute the `mean()` on each of these columns using the already-familiar base function `lapply()`.

- Each group returns a list of three elements containing the mean value which will become the columns of the resulting `data.table`.

- Since `lapply()` returns a `list`, so there is no need to wrap it with an additional `.()` (if necessary, refer to this tip).

We are almost there. There is one little thing left to address. In our `flights` `data.table`, we only wanted to calculate the `mean()` of two columns `arr_delay` and `dep_delay`. But `.SD` would contain all the columns other than the grouping variables by default.

#### – How can we specify just the columns we would like to compute the `mean()` on?

#### .SDcols

Using the argument `.SDcols`. It accepts either column names or column indices. For example, `.SDcols = c("arr_delay", "dep_delay")` ensures that `.SD` contains only these two columns for each group.

Similar to part g), you can also provide the columns to remove instead of columns to keep using `-` or `!` sign as well as select consecutive columns as `colA:colB` and deselect consecutive columns as `!(colA:colB)` or `-(colA:colB)`.

Now let us try to use `.SD` along with `.SDcols` to get the `mean()` of `arr_delay` and `dep_delay` columns grouped by `origin`, `dest` and `month`.

    flights[carrier == "AA",                       ## Only on trips with carrier "AA"
            lapply(.SD, mean),                     ## compute the mean
            by = .(origin, dest, month),           ## for every 'origin,dest,month'
            .SDcols = c("arr_delay", "dep_delay")] ## for just those specified in .SDcols
    #      origin dest month  arr_delay  dep_delay
    #   1:    JFK  LAX     1   6.590361 14.2289157
    #   2:    LGA  PBI     1  -7.758621  0.3103448
    #   3:    EWR  LAX     1   1.366667  7.5000000
    #   4:    JFK  MIA     1  15.720670 18.7430168
    #   5:    JFK  SEA     1  14.357143 30.7500000
    #  ---
    # 196:    LGA  MIA    10  -6.251799 -1.4208633
    # 197:    JFK  MIA    10  -1.880184  6.6774194
    # 198:    EWR  PHX    10  -3.032258 -4.2903226
    # 199:    JFK  MCO    10 -10.048387 -1.6129032
    # 200:    JFK  DCA    10  16.483871 15.5161290

### f) Subset `.SD` for each group:

#### – How can we return the first two rows for each `month`?

    ans <- flights[, head(.SD, 2), by = month]
    head(ans)
    #    month year day dep_delay arr_delay carrier origin dest air_time distance hour
    # 1:     1 2014   1        14        13      AA    JFK  LAX      359     2475    9
    # 2:     1 2014   1        -3        13      AA    JFK  LAX      363     2475   11
    # 3:     2 2014   1        -1         1      AA    JFK  LAX      358     2475    8
    # 4:     2 2014   1        -5         3      AA    JFK  LAX      358     2475   11
    # 5:     3 2014   1       -11        36      AA    JFK  LAX      375     2475    8
    # 6:     3 2014   1        -3        14      AA    JFK  LAX      368     2475   11

####

- `.SD` is a `data.table` that holds all the rows for that group. We simply subset the first two rows as we have seen here already.

- For each group, `head(.SD, 2)` returns the first two rows as a `data.table`, which is also a `list`, so we do not have to wrap it with `.()`.

### g) Why keep `j` so flexible?

So that we have a consistent syntax and keep using already existing (and familiar) base functions instead of learning new functions. To illustrate, let us use the `data.table` `DT` that we created at the very beginning under What is a data.table? section.

#### – How can we concatenate columns `a` and `b` for each group in `ID`?

    DT[, .(val = c(a,b)), by = ID]
    #     ID val
    #  1:  b   1
    #  2:  b   2
    #  3:  b   3
    #  4:  b   7
    #  5:  b   8
    #  6:  b   9
    #  7:  a   4
    #  8:  a   5
    #  9:  a  10
    # 10:  a  11
    # 11:  c   6
    # 12:  c  12

####

- That’s it. There is no special syntax required. All we need to know is the base function `c()` which concatenates vectors and the tip from before.

#### – What if we would like to have all the values of column `a` and `b` concatenated, but returned as a list column?

    DT[, .(val = list(c(a,b))), by = ID]
    #    ID         val
    # 1:  b 1,2,3,7,8,9
    # 2:  a  4, 5,10,11
    # 3:  c        6,12

####

- Here, we first concatenate the values with `c(a,b)` for each group, and wrap that with `list()`. So for each group, we return a list of all concatenated values.

- Note those commas are for display only. A list column can contain any object in each cell, and in this example, each cell is itself a vector and some cells contain longer vectors than others.

Once you start internalising usage in `j`, you will realise how powerful the syntax can be. A very useful way to understand it is by playing around, with the help of `print()`.

For example:

    ## (1) look at the difference between
    DT[, print(c(a,b)), by = ID]
    # [1] 1 2 3 7 8 9
    # [1]  4  5 10 11
    # [1]  6 12
    # Empty data.table (0 rows and 1 cols): ID

    ## (2) and
    DT[, print(list(c(a,b))), by = ID]
    # [[1]]
    # [1] 1 2 3 7 8 9
    #
    # [[1]]
    # [1]  4  5 10 11
    #
    # [[1]]
    # [1]  6 12
    # Empty data.table (0 rows and 1 cols): ID

In (1), for each group, a vector is returned, with length = 6,4,2 here. However (2) returns a list of length 1 for each group, with its first element holding vectors of length 6,4,2. Therefore (1) results in a length of `6+4+2 = 12`, whereas (2) returns `1+1+1=3`.

## Summary

The general form of `data.table` syntax is:

    DT[i, j, by]

We have seen so far that,

#### Using `i`:

- We can subset rows similar to a `data.frame`- except you don’t have to use `DT$` repetitively since columns within the frame of a `data.table` are seen as if they are variables.

- We can also sort a `data.table` using `order()`, which internally uses `data.table`’s fast order for performance.

We can do much more in `i` by keying a `data.table`, which allows blazing fast subsets and joins. We will see this in the “Keys and fast binary search based subsets” and “Joins and rolling joins” vignette.

#### Using `j`:

1. Select columns the `data.table` way: `DT[, .(colA, colB)]`.

2. Select columns the `data.frame` way: `DT[, c("colA", "colB")]`.

3. Compute on columns: `DT[, .(sum(colA), mean(colB))]`.

4. Provide names if necessary: `DT[, .(sA =sum(colA), mB = mean(colB))]`.

5. Combine with `i`: `DT[colA > value, sum(colB)]`.

#### Using `by`:

- Using `by`, we can group by columns by specifying a list of columns or a character vector of column names or even expressions. The flexibility of `j`, combined with `by` and `i` makes for a very powerful syntax.

- `by` can handle multiple columns and also expressions.

- We can `keyby` grouping columns to automatically sort the grouped result.

- We can use `.SD` and `.SDcols` in `j` to operate on multiple columns using already familiar base functions. Here are some examples:

  1. `DT[, lapply(.SD, fun), by = ..., .SDcols = ...]` - applies `fun` to all columns specified in `.SDcols` while grouping by the columns specified in `by`.

  2. `DT[, head(.SD, 2), by = ...]` - return the first two rows for each group.

  3. `DT[col > val, head(.SD, 1), by = ...]` - combine `i` along with `j` and `by`.

#### And remember the tip:

As long as `j` returns a `list`, each element of the list will become a column in the resulting `data.table`.

We will see how to add/update/delete columns by reference and how to combine them with `i` and `by` in the next vignette.