---
title: "Ada & Archibald MacLeish Field Station Data"
author: "Ben Baumer, Rose Goueth, Wencong Li (Priscilla) and Weijia Zhang (Vega), Paul Wetzel"
date: "2016-04-10"
output: rmarkdown::html_vignette
vignette: >
  %\VignetteIndexEntry{Using MacLeish Weather Data}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, include=FALSE}
library(knitr)
opts_chunk$set(fig.width = 6, fig.height = 4)
```

## MacLeish

The [`macleish`](http://www.github.com/beanumber/macleish) package for R contains weather data collected at the [Ada & Archibald MacLeish Field Station](http://www.smith.edu/ceeds/macleish.php) in Whately, MA, as well as spatial data detailing various features of the property. This vignette will illustrate how these data can be used. 

### Getting started:
To start using the package, load the `macleish` package into your R session:

```{r, message=FALSE}
library(macleish)
```


## Using the MacLeish Field Station weather data

Two data frames are included in the package: `whately_2015` and `orchard_2015`. These contain weather data averaged over every ten minute period for the calendar year 2015. The `head` and `tail` will give you the first (last) 6 readings from the whately weather station from 2015, respectively.

```{r}
head(whately_2015)
tail(whately_2015)
```

```{r, eval=FALSE}
head(orchard_2015)
tail(orchard_2015)
```

To access data during wider time spans, make use of the [`etl` framework](http://www.github.com/beanumber/etl) to download the data and import it into a database. Please see the documentation for `etl_extract` for further details and examples. 

```{r, eval=FALSE}
help("etl_extract.etl_macleish")
```


## The 2015 MacLeish weather report

This portion of the vignette is largely a re-creation of the Macleish Field Station 2015 Weather Report. You can download [the orginal report](http://www.smith.edu/ceeds/documents/DataInformation2015.pdf) as a PDF file.

#### Introduction to MacLeish Weather Stations
Weather conditions at Smith College's [Ada & Archibald MacLeish Field Station](http://www.smith.edu/ceeds/macleish.php) are recorded at the **WhatelyMet** weather station. This weather collection site is located at the end of Poplar Hill Road in Whately, Massachusetts, USA (Latitude 42 deg. 26 min. 56 sec. N Longitude 72 deg. 40 min. 50 sec. W). The meteorological instruments of WhatelyMet (except the rain gauge) are mounted at the top of a tower 25.3 m tall, well above the surrounding forest canopy. The tower is located on a local ridge at an elevation 250.75m above sea level.

![MacLeish Field Station](../inst/extdata/macleish_600px.jpg)

The second weather data collection site, known as **OrchardMet**, is located about 250 m north of the first tower in an open field next to an apple orchard. Full canopy trees (~20 m tall) are within 30 m of this station. This station has a standard instrument configuration with temperature, relative humidity, solar radiation, and barometric pressure measured between 1.5 and 2.0 m above the ground. Wind speed and direction are measured on a 10 m tall tower and precipitation is measured on the ground. Ground temperature is measured at 15 and 30 cm below the ground surface 2 m south of the tower. The tower is located 258.1 m above sea level. Data collection at OrchardMet began on June 27th, 2014. 

This documentation describes the weather data collected at WhatelyMet and OrchardMet during 2015. It provides highlights of the year's weather as well as general trends that were observed. We hope that you find the doucumentation both interesting and useful. All data reported in this document are available through the [`macleish`](http://www.github.com/beanumber/macleish) package for R. 

### Variables used in this doucumentation:

* `when`: Timestamp for each measurment set
* `temperature`: Average temperature (°C)
* `wind_speed`: Average windspeed (m/s)
* `wind_dir`: Wind direction (degree)
* `rel_humidty`: Relative Humidity (mm)
* `pressure`: Average atomspheric pressure (mb)
* `rainfall`: Main Rainfall amount per day (mm)
* `solar_radiation`: WhatelyMet Average Solar Radiance (W/m^2)
* `par_density`: OrchardMet Photosynthetically Active Radiation (sunlight between 400 and 700 nm) in average density (W/m^2)
* `par_total`: OrchardMet Photosynthetically Active Radiation (sunlight between 400 and 700 nm) in average total over measurement period (W/m^2)

### Air Temperature

In this example we visualize the trend of average daily temperature at the MacLeish Field Station over 2015.

```{r daily, message=FALSE, warning=FALSE}
library(ggplot2)
library(dplyr)
library(lubridate)
daily <- whately_2015 %>%
  mutate(the_date = as.Date(when, tz = "EST")) %>%
  group_by(the_date) %>%
  summarize(N = n(), avg_temp = mean(temperature), 
            max_temp = max(temperature), min_temp =
              min(temperature))
```


```{r temp-plot, message=FALSE}
ggplot(data = whately_2015, aes(x = when, y = temperature)) +
  geom_line(color = "lightgray") + 
  geom_smooth() + 
  geom_line(data = daily, aes(x = as.POSIXct(the_date), 
                              y = avg_temp)) + 
  xlab(NULL) + ylab("Temperature (Celsius)")
```


As shown in the table below, the monthly average temperature in 2015 ranged from -6.4 °C in January to 21.6°C in July. The large difference in recorded temperatures between the two stations in November was the result of a loose wire that resulted in erroneous temperature readings at the OrchardMet station (see below). 

```{r temp-table}
monthly_w <- whately_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(avg_temp = mean(temperature))
monthly_o <- orchard_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(avg_temp = mean(temperature))
monthly_w %>%
  inner_join(monthly_o, by = "the_month")
```

The highest recorded temperature at WhatelyMet was 33.08 °C on Septemper 8th. The lowest recorded temperature was -22.28 °C on January 8th. 

```{r temp-extremes}
whately_2015 %>%
  arrange(desc(temperature)) %>%
  head(1)
whately_2015 %>%
  arrange(temperature) %>%
  head(1)
```

The average daily temperature range recorded from both stations (daily maximum-minimum) was 10.4 °C. The maximum daily temperature range was 21.1 °C on May 8th at WhatelyMet. 

```{r}
daily <- daily %>%
  mutate(temp_range = max_temp - min_temp)
daily %>%
  select(temp_range) %>%
  summary()
```

The minimum daily temperature range was 2.1 °C and occurred on April 9th at WhatelyMet. However, daily temperature ranges of less than three degrees also occurred on April 7th, February 9th, June 1st, June 28th.

```{r}
daily %>%
  arrange(desc(temp_range)) %>%
  head(1)
daily %>%
  arrange(temp_range) %>%
  head()
```

#### Anomalies

In late November, a loose wire in the OrchardMet station resulted in some erroneous temperature readings. We have left these readings in, but you should exercise caution when summarizing data that includes this time period. Imputation of these data would be a terrific exercise.

```{r orchard-anolomies}
orchard_2015 %>%
  filter(month(when) == 11) %>%
  ggplot(aes(x = when, y = temperature)) +
    geom_line() + geom_smooth()
```


### Relative Humidity

Percent average monthly relative humidity ranged from 56.4% (March) to 94% (December). Interestingly, WhatelyMet relative humidity values were notably higher than OrchardMet values starting in August. It is unclear why this pattern occurred during the last part of the year.

```{r humidity-table}
monthly_w <- whately_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(avg_humidity_w = mean(rel_humidity))
monthly_o <- orchard_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(avg_humidity_o = mean(rel_humidity))
monthly_w %>%
  inner_join(monthly_o, by = "the_month")
```


### Wind

Wind speed and direction is measured every second and then averaged and logged every 10 minutes at both weather stations. OrchardMet measures wind midway up the forest canopy (10 m high) in a small woodland clearing while WhatleyMet measures wind 25.3 m above the ground which is above the tree canopy.

OrchardMet is located in a woodland clearing where winds are buffeted by trees of the forest canopy. Most wind comes from the west and southwest, with 67% of the time less than 1 m/s. Wind speeds did not average over 3 m/s at any time of the year. 

```{r, message=FALSE, warning=FALSE}
require(clifro)
orchard_2015 %>%
  with(windrose(wind_speed, wind_dir))
```

WhatleyMet is above the forest canopy and recorded winds frequently from the northwest, north, and south during the year. Average wind velocities were higher, with 46% of the measurements falling between 1 and 2 m/s, with maximum average velocities up to 6 m/s. 

```{r, message=FALSE}
whately_2015 %>%
  with(windrose(wind_speed, wind_dir))
```


### Precipitation

A total of 1306 mm of precipitation was recorded at WhatelyMet during 2015. 

```{r}
sum(whately_2015$rainfall)
```

Although precipitation is relatively evenly distributed across the year, precipitation totals were highest in June and lowest in May.

```{r rain-table}
monthly_w <- whately_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(total_precip_w = sum(rainfall))
monthly_o <- orchard_2015 %>%
  mutate(the_month = month(when, label = TRUE, abbr = FALSE)) %>%
  group_by(the_month) %>%
  summarize(total_precip_o = sum(rainfall))
monthly_w %>%
  inner_join(monthly_o, by = "the_month")
```

Since the data was recorded every ten minutes, we need to group the data daily in order to get the mean rainfall amount per day.

```{r, message=FALSE}
daily_precip <- whately_2015 %>%
  mutate(the_date = as.Date(when, tz = "EST")) %>%
  group_by(the_date) %>%
  summarize(N = n(), total_precip = sum(rainfall)) %>%
  mutate(cum_precip = cumsum(total_precip),
         cum_rescale = (cum_precip / max(cum_precip)) * max(total_precip))
```

The following plot will show you how much rainfall you would have per day at macleish field station over 2015, as well as the cumulative amount of rainfall over the course of the year.

```{r daily-precip, message=FALSE}
ggplot(data = daily_precip, 
       aes(x = the_date, y = total_precip)) +
  geom_bar(stat = "identity") + 
  geom_line(aes(y = cum_rescale), color = "blue") + 
  ylab("Daily Precipitation (mm)") + xlab(NULL)
```

February and March had the greatest number of precipitation events. Annual precipitation accumulated at a low, but fairly steady rate through June. After June rainfall levels increased and total accumulation increased sharply to the end of the calendar year. Starting in June a series of large rainfall events (40-50 mm) occurred regularly over the summer. The largest precipitation event in 2015 occurred on September 30th when 113.8 mm (8.7% of the annual total) of precipitation fell. During 2015, there were 15, 25.4 mm (1”) precipitation events; 2, 50.8 mm (2”) precipitation events; and 1, 76.2 mm (3”) precipitation event. 

## Using the Macleish Field Station Geographic Data

### Maps

We can create a map of MacLeish using the `leaflet` package and the spatial data in the `macleish_layers` object. This is a `list` of `Spatial*DataFrame` objects that contain various pieces of information about the field station, including the location of buildings, streams, trails, and landmarks.

```{r}
names(macleish_layers)
```

These layers can be combined to provide a fuller picture of the activity at the Field Station. 

```{r, eval=FALSE, message=FALSE}
library(leaflet)
leaflet() %>%
  addTiles() %>%
  addPolygons(data = macleish_layers[["boundary"]],
              weight = 1) %>%
  addPolygons(data = macleish_layers[["buildings"]],
              weight = 1) %>%
  addMarkers(data = subset(macleish_layers[["landmarks"]], grepl("Met", Label)), 
             popup = ~Label)
```

